Passed mot but dangerous advisory

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Danjo said:
Aye. Im still a novice. So think will have to see a speciallist to find out what prop i need.

Not sure what you mean by splines.

But here is tube link to what the furthest back uj is like.


Cheers
Click to expand...

Seems like my input is too late but I've scrapped far better uj's than that. Just imagine that coming apart and spinning round under your backside. If you were local to me I'd take a look around for you, so I'm sure somebody nearby will offer the same.
 
Discokids said:
Seems like my input is too late but I've scrapped far better uj's than that. Just imagine that coming apart and spinning round under your backside. If you were local to me I'd take a look around for you, so I'm sure somebody nearby will offer the same.
Click to expand...
I don't need to imagine :(
 
The Mad Hat Man said:
might be worth checking the other grease points pretty soon too.

@mpower
@hoopfish
@flat
Click to expand...

You tagged me? Read the thread, I wouldn’t drive that with that prop attached. It’s literally at failure point.

New UJ’s

All you need is a vice or BIG g clamp, a grinder, handful of sockets (as spacers), circling pliers and some new UJ’s - DONT buy pattern/britpart ones.

Google what to do, I hadn’t rebuilt propshafts before and did both mine in an afternoon.

I first tried pressing them out, takes ages, so cut them out instead. DONT damage the actual prop shaft though, just cut the UJ

If you know your way round a toolbox it’s easy tbh
 
Last edited:
flat said:
You tagged me? Read the thread, I wouldn’t drive that with that prop attached. It’s literally at failure point.

New UJ’s

All you need is a vice or BIG g clamp, a grinder, handful of sockets (as spacers), circling pliers and some new UJ’s - DONT buy pattern/britpart ones.

Google what to do, I hadn’t rebuilt propshafts before and did both mine in an afternoon.

I first tried pressing them out, takes ages, so cut them out instead. DONT damage the actual prop shaft though, just cut the UJ

If you know your way round a toolbox it’s easy tbh
Click to expand...
Cheers. I going to give it a shot.. just need to work out what size hardy splicers i need. Would i need to take one off to measure it properly?
 
@Danjo depending upon where you buy your uj's from this can make life easier

Screenshot_20171216-194100.png


You'll also need a 9/16 " spanner if you haven't already got one
 
If the fender is your daily drive. Drop the bad prop off totally and put it in diff lock then you can still drive.

If it’s the rear prop shaft you take off put the nuts back on the handbrake drum so it doesn’t all fall off lol.

Also bear in mind that if you drop a rear prop off then you don’t have a hand brake anymore as it works on the transmission. So make sure you chock the vehicle.
 
flat said:
If the fender is your daily drive. Drop the bad prop off totally and put it in diff lock then you can still drive.

If it’s the rear prop shaft you take off put the nuts back on the handbrake drum so it doesn’t all fall off lol.

Also bear in mind that if you drop a rear prop off then you don’t have a hand brake anymore as it works on the transmission. So make sure you chock the vehicle.
Click to expand...
you have hand brake if you put it in difflock
 
All great advice guys. Cheers. Shame i cant find anywhere that sells them off the shelf near me. So might take it off and use in diff lock until they arrive .

Thanks
 
You must log in or register to reply here.

Similar threads

xDParis64
Right...
Replies
9
Views
1K
pwood999
pwood999
K
1st Time Landy Owner - need a garage in Bournemouth area
Replies
6
Views
1K
brianp38dse
brianp38dse
L
Hand brake question
Replies
14
Views
1K
romanrob
R
frostythor
My Last MOT
Replies
1
Views
527
lynall
L
PopPops
Disco 2 Making up rear brake pipes
Replies
18
Views
2K
canucki
canucki
Back
Top