Painting underneath rear cross member

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Discodevon

Discodevon

Well-Known Member
Posts
1,448
Hello everybody, hope you are all enjoying this lovely summer! I’m looking to paint my rear crossmember, the rear face is fine and with no rust but underneath (where the towing electrics bolt on) is looking a little scabby, only light flakey rust nothing major or holes etc.. I’m thinking to wire wheel it all off and red oxide prime, The question is do I tackle this with a brush paint or get to work masking and spray etc?

Best regards to all!
 
Thank you all for that advice, I need to tow every other week so at the weekend I’m going to make a start and take off the hitch and the tow electrical plate which bolts onto the x member, I have some brilliant red oxide ( not the Halfords sort of stuff ) thanks to a member on here mick he’s called, but you can’t spray it unfortunately so may have to just do the bottom with that stuff and then do the front face with a spray can type red oxide... looks a fiddle of a job though! Not looking forward to it one bit
 
Thank you all for that advice, I need to tow every other week so at the weekend I’m going to make a start and take off the hitch and the tow electrical plate which bolts onto the x member, I have some brilliant red oxide ( not the Halfords sort of stuff ) thanks to a member on here mick he’s called, but you can’t spray it unfortunately
 
upload_2019-6-12_20-35-17.jpeg
 
You must log in or register to reply here.

Similar threads

LandySurf
Painting Defender Rear Crossmember
Replies
17
Views
3K
LandySurf
LandySurf
jimllshiftit
Any advice for novice welder about to stitch new rear cross member to 90 chassis?
Replies
3
Views
789
tottot
tottot
Inner Farmer
Series 3 floor boards
Replies
0
Views
486
Inner Farmer
Inner Farmer
Inner Farmer
Series 3 floor boards
Replies
7
Views
952
Inner Farmer
Inner Farmer
K
What money should I be asking?
2
Replies
27
Views
4K
Karls
K
Back
Top