P38 Wing Mirrors....how many pins?
- Thread starter oowebb
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Datatek
Well-Known Member
- Posts
- 44,810
- Location
- Near Poitiers SW France
Depends if it's a standard mirror or has photochromic dipping and heating.
Datatek
Well-Known Member
- Posts
- 44,810
- Location
- Near Poitiers SW France
Then sure as hell it will not be a 6 pin, I would have thought 10, but if there is a 12 it could also be that, I know not. Easiest way is to take a look.
- Posts
- 58,170
- Location
- Preston Lancs.
If it has reverse dip 10.
Datatek
Well-Known Member
- Posts
- 44,810
- Location
- Near Poitiers SW France
Just looked at RAVE, as Wammers said, 10 for reverse dip linked to memory seats and 12 if it has automatic photochromic dipping as well linked the interior mirror.
Rachelkgr
Active Member
- Posts
- 715
- Location
- Manchester
My mirrors have 10 pins, and dip/heat. The car loom has 12.wires, wonder if the mirrors are upgradable to the dimming type?
fortgrange
Active Member
- Posts
- 544
- Location
- Rickmansworth
As has been said 12 pin for all singing and dancing. If the mirror that's left has the dimming facility and you replace the broken one without the facility, it can be a bit off putting at first when it gets dark, you soon get used to it.
- Posts
- 58,170
- Location
- Preston Lancs.
I have mentioned before, there are only two plugs used on all P38s. Either 6 pin or 12 pin. In the 10 pin application 2 of the 12 pins are not used.
