p38 overheating help

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
S

slashy

New Member
Posts
13
help, my rangie had to be trailered home this afternoon, not happy:mad:. temp gage went into the red and you could hear the coolant bubbling . we checked the oil filler cap for signs of a blown gasket, but nothing shown. any idears? thanks
 
which engine and check rad hot all the way across to show that all of rad is actually cooling ,thermostat ,and if petrol hope block isnt cracked behind one of the liners
 
i have checked all the belts there all fine , the water was full to propper mark with water and coolant. its the 4.0 with a gas con, will check the rad tom, where do i check the liners cheers lads
 
you cant easily check for cracked block but gives similar symptoms to head gasket ie over pressurising but the recent ones ive had have been poor rads and thermostats in that rad is only colling over a small area of whole rad
 
ok nice 1 for that better start looking her over in the morning, git to find the problem as not getting rid in a hurry cheers
 
You must log in or register to reply here.

Similar threads

enjoi
P38A Going through radiators- not overheating
2 3 4
Replies
60
Views
4K
enjoi
enjoi
ar1g3
P38A P38 rattle at idle
2
Replies
26
Views
3K
roythebus
R
V
Defender 110 CSW TD5 failed sniff test
2
Replies
21
Views
1K
versteckt
V
T
TD5 crank no start after overheating
Replies
1
Views
458
tom1979
tom1979
Bustrucket
Disco 2 Td5 Overheating
Replies
3
Views
776
johnlad
johnlad
Back
Top