P38 door open?

Guys

Had problems with alarm going off m finally got a glimpse of error message

" door open LH/R"

The door is shut and can be locked but the power windows gone off ?

Possible fuse ?

Any suggestions

Cheers
Chris

Sounds like a faulty m/switch in door catch.Get the door card off to check for bad/dirty/loose/corroded connections ,and check where the wiring goes from body to door.
HTH
Ed

Broken wires between the door and the B pillar are also a possibility.

Ok

Door card off all wires look ok?

Central locking works

But the window won't go up or down returns window not set error from both door control and centre consul ? So power is getting to the door

Can't drive car as car thinks door open and won't raise off the ground

Anymore suggestions ??

Cheers

Door Out Station??

hi , where abouts are you and what is the details of the car ??????? possible someone local could help ..but you need to let us know we cant guess ? i know were all good at certain things but were not magicians ,or maybe wammy and datatek are ??????????? ho ho ho ho

4.6HSE 1998 , Newcastle upon Tyne

As I say confused ?

Sorry saint what do you mean by door out station ?

Saint.V8 said:

Door Out Station??

Click to expand...

Are the rear door locks driven by an out station or is it just fronts?

Chris91122 said:

Sorry saint what do you mean by door out station ?

Click to expand...

Each door has an OutStation that looks after the Window functions, Central Locking etc....if this little black box is confused it may be giving you problems.

Chrisfrain2007 said:

Are the rear door locks driven by an out station or is it just fronts?

Click to expand...

Not 100% sure - I thought they all had an Out Station...will check.

Chrisfrain2007 said:

Are the rear door locks driven by an out station or is it just fronts?

Click to expand...

Looks like just the fronts - so scratch that .....

Chris91122 said:

Ok

Door card off all wires look ok?

Central locking works

But the window won't go up or down returns window not set error from both door control and centre consul ? So power is getting to the door

Can't drive car as car thinks door open and won't raise off the ground

Anymore suggestions ??

Cheers

Click to expand...

You can't tell if the wires are broken by just looking at them, the wire breaks inside the insulation. You have to test them with an ohm meter for continuity, or a voltmeter to check for the correct voltage/ earth levels.

I don't think wires are broken otherwise c/l wouldn't work , or feedback from window switch ?

Or am I grasping at straws

C/L and Windows use diffreent wiring in the loom - so it is possible for one to be broken whilst the remainder of the services are fully functional....

Ok so which wire is the feed for the "door open" and how do I bypass it ;PLEASE

It's all in RAVE - as attached....

Hope it helps.

Thanks saint ,next question how would I go about it? Any thoughts?