L322 alarm and keyfob issues

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
It sounds like the BCM is set to backup, not master - you should be able to change that. You also need an engineering 'key' to edit the CCF (but not to reload it).
Are you trying to download the as-built data? If you want to PM me your VIN and an email address I can try & download it for you and send all the files to you in a compressed file.
 
Graculus said:
It sounds like the BCM is set to backup, not master - you should be able to change that. You also need an engineering 'key' to edit the CCF (but not to reload it).
Are you trying to download the as-built data? If you want to PM me your VIN and an email address I can try & download it for you and send all the files to you in a compressed file.
Click to expand...

How can I change BCM from backup to master? Couldn't see option for that.

Regarding the engineering key I have downloaded an app that generates a code so everything I do to CCF is under engineering mode.

I am trying to download VIN specific as-built and have that fault described earlier.

I have compressed the last session and the download manager for the VIN updater. I can send them over so you can have a look.
 
Cheers - three things stand out...
1. The time zone doesn't match the country assigned, it might be nothing but worth changing IMO
2. The IPC is the CCF master, with the PCM as the backup - I've never seen that, possibly a 'shadow backup' if the BCM isn't available?.
3. there are a lot of NOK fail errors, I'd suggest trying a different interface cable, this could be the root cause if the cable is failing to communicate on the correct Bus at the correct speed. Everything on the HS CAN seems OK, this could also indicate an IPC/IPK issue as it's also a 'gateway'.

CCF Data Found - Master IPC_SYSTEM_A, Backup PCM_SYSTEM_A, Backup OTHER</tm>
</text>
</event>
<event type="info">
<timestamp>18:14:29</timestamp>
<status>OK</status>
<text>
<tm>Network test results.</tm>
</text>
</event>
<event type="info">
<timestamp>18:14:29</timestamp>
<status>OK</status>
<text>
<tm>Module : Instrument cluster control module.</tm>
</text>
</event>
<event type="operation">
<timestamp>18:14:30</timestamp>
<status>OK</status>
<text>
<tm>Communications failure :V14229_ReadDataById 0xF190 Result = failed communications with target ECU</tm>
</text>
</event>
<event type="error">
<timestamp>18:14:30</timestamp>
<status>NOK</status>
<text>
<tm>Module : Powertrain control module</tm>
</text>
</event>
<event type="operation">
<timestamp>18:14:31</timestamp>
<status>OK</status>
<text>
<tm>Communications failure :V14229_ReadDataById 0xF190 Result = failed communications with target ECU</tm>
</text>
</event>
<event type="error">
<timestamp>18:14:31</timestamp>
<status>NOK</status>
<text>
<tm>Module : Steering angle sensor module</tm>
</text>
</event>
<event type="operation">
<timestamp>18:14:32</timestamp>
<status>OK</status>
<text>
<tm>Communications failure :V14229_ReadDataById 0xF190 Result = failed communications with target ECU</tm>
</text>
</event>
<event type="error">
<timestamp>18:14:32</timestamp>
<status>NOK</status>
<text>
<tm>Module : Transfer case control module</tm>
</text>
</event>
<event type="operation">
<timestamp>18:14:33</timestamp>
<status>OK</status>
<text>
<tm>Communications failure :V14229_ReadDataById 0xF190 Result = failed communications with target ECU</tm>
</text>
</event>
<event type="error">
<timestamp>18:14:33</timestamp>
<status>NOK</status>
<text>
<tm>Module : Vehicle dynamics control module</tm>
</text>
</event>
<event type="operation">
<timestamp>18:14:34</timestamp>
<status>OK</status>
<text>
<tm>Communications failure :V14229_ReadDataById 0xF190 Result = failed communications with target ECU</tm>
</text>
</event>
<event type="error">
<timestamp>18:14:34</timestamp>
<status>NOK</status>
<text>
<tm>Module : Vehicle immobilizer control module</tm>
</text>
</event>
<event type="operation">
<timestamp>18:14:36</timestamp>
<status>OK</status>
<text>
<tm>Communications failure :V14229_ReadDataById 0xF190 Result = failed communications with target ECU</tm>
</text>
</event>
<event type="error">
<timestamp>18:14:36</timestamp>
<status>NOK</status>
<text>
<tm>Module : Rear entertainment control module</tm>
</text>
</event>
<event type="operation">
<timestamp>18:14:37</timestamp>
<status>OK</status>
<text>
<tm>Communications failure :V14229_ReadDataById 0xF190 Result = failed communications with target ECU</tm>
</text>
</event>
<event type="error">
<timestamp>18:14:37</timestamp>
<status>NOK</status>
<text>
<tm>Module : Cellular telephone control module</tm>
</text>
</event>
<event type="operation">
<timestamp>18:14:39</timestamp>
<status>OK</status>
<text>
<tm>Communications failure :V14229_ReadDataById 0xF190 Result = failed communications with target ECU</tm>
</text>
</event>
<event type="error">
<timestamp>18:14:39</timestamp>
<status>NOK</status>
<text>
<tm>Module : Television module</tm>
</text>
</event>
 
Graculus said:
Cheers - three things stand out...
1. The time zone doesn't match the country assigned, it might be nothing but worth changing IMO
2. The IPC is the CCF master, with the PCM as the backup - I've never seen that, possibly a 'shadow backup' if the BCM isn't available?.
3. there are a lot of NOK fail errors, I'd suggest trying a different interface cable, this could be the root cause if the cable is failing to communicate on the correct Bus at the correct speed. Everything on the HS CAN seems OK, this could also indicate an IPC/IPK issue as it's also a 'gateway'.

CCF Data Found - Master IPC_SYSTEM_A, Backup PCM_SYSTEM_A, Backup OTHER</tm>
</text>
</event>
<event type="info">
<timestamp>18:14:29</timestamp>
<status>OK</status>
<text>
<tm>Network test results.</tm>
</text>
</event>
<event type="info">
<timestamp>18:14:29</timestamp>
<status>OK</status>
<text>
<tm>Module : Instrument cluster control module.</tm>
</text>
</event>
<event type="operation">
<timestamp>18:14:30</timestamp>
<status>OK</status>
<text>
<tm>Communications failure :V14229_ReadDataById 0xF190 Result = failed communications with target ECU</tm>
</text>
</event>
<event type="error">
<timestamp>18:14:30</timestamp>
<status>NOK</status>
<text>
<tm>Module : Powertrain control module</tm>
</text>
</event>
<event type="operation">
<timestamp>18:14:31</timestamp>
<status>OK</status>
<text>
<tm>Communications failure :V14229_ReadDataById 0xF190 Result = failed communications with target ECU</tm>
</text>
</event>
<event type="error">
<timestamp>18:14:31</timestamp>
<status>NOK</status>
<text>
<tm>Module : Steering angle sensor module</tm>
</text>
</event>
<event type="operation">
<timestamp>18:14:32</timestamp>
<status>OK</status>
<text>
<tm>Communications failure :V14229_ReadDataById 0xF190 Result = failed communications with target ECU</tm>
</text>
</event>
<event type="error">
<timestamp>18:14:32</timestamp>
<status>NOK</status>
<text>
<tm>Module : Transfer case control module</tm>
</text>
</event>
<event type="operation">
<timestamp>18:14:33</timestamp>
<status>OK</status>
<text>
<tm>Communications failure :V14229_ReadDataById 0xF190 Result = failed communications with target ECU</tm>
</text>
</event>
<event type="error">
<timestamp>18:14:33</timestamp>
<status>NOK</status>
<text>
<tm>Module : Vehicle dynamics control module</tm>
</text>
</event>
<event type="operation">
<timestamp>18:14:34</timestamp>
<status>OK</status>
<text>
<tm>Communications failure :V14229_ReadDataById 0xF190 Result = failed communications with target ECU</tm>
</text>
</event>
<event type="error">
<timestamp>18:14:34</timestamp>
<status>NOK</status>
<text>
<tm>Module : Vehicle immobilizer control module</tm>
</text>
</event>
<event type="operation">
<timestamp>18:14:36</timestamp>
<status>OK</status>
<text>
<tm>Communications failure :V14229_ReadDataById 0xF190 Result = failed communications with target ECU</tm>
</text>
</event>
<event type="error">
<timestamp>18:14:36</timestamp>
<status>NOK</status>
<text>
<tm>Module : Rear entertainment control module</tm>
</text>
</event>
<event type="operation">
<timestamp>18:14:37</timestamp>
<status>OK</status>
<text>
<tm>Communications failure :V14229_ReadDataById 0xF190 Result = failed communications with target ECU</tm>
</text>
</event>
<event type="error">
<timestamp>18:14:37</timestamp>
<status>NOK</status>
<text>
<tm>Module : Cellular telephone control module</tm>
</text>
</event>
<event type="operation">
<timestamp>18:14:39</timestamp>
<status>OK</status>
<text>
<tm>Communications failure :V14229_ReadDataById 0xF190 Result = failed communications with target ECU</tm>
</text>
</event>
<event type="error">
<timestamp>18:14:39</timestamp>
<status>NOK</status>
<text>
<tm>Module : Television module</tm>
</text>
</event>
Click to expand...

Some of the modules do not communicate as I have them disconnected at the moment as I am repainting the center console plastics and the HVAC and air suspension controls :D

Most problematic is the VIM module that SDD cannot connect to.

Regarding the timezone - I have just changed country and diller info to see if it will make a change to enable download of the files.

Do you know how to swap the master CCF module? And anything about that error I experience while trying to upload the CCF back to the car?
 
You must log in or register to reply here.

Similar threads

DollyBird
Engine disabled, keys not working, tried the guide “Re-synching the Range Rover P38 diesel engine with the Solved - BECM using a Nanocom” no luck
Replies
9
Views
1K
DollyBird
DollyBird
Ola66
L322 2007 Vogue SE 3.6TDV8 Doesn't recognise key fob, can't turn key in ignition or turn off alarm!
Replies
5
Views
792
Graculus
Graculus
Z
TD6 2003 L322 Rangerover Sound system making a brrp,brrp,brrp when car is locked/before entering key
Replies
8
Views
695
Mark Piercy
Mark Piercy
I
P38 BeCM locked?
Replies
8
Views
759
pwood999
pwood999
R
Intermittent Alarm
Replies
7
Views
775
Ranger66
R
Back
Top