P38 diesel FIP leak

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
After all the rain cleared I took a look at the wire to the sensor on injector four. Where it goes into the injector the insulation looks a bit split. And then I found one of the wires coming out of the connector had broken off. So I shall have to add a new length and see whether that cures it. Otherwise I shall take out injector four and check that closely.
 
BigJessie said:
After all the rain cleared I took a look at the wire to the sensor on injector four. Where it goes into the injector the insulation looks a bit split. And then I found one of the wires coming out of the connector had broken off. So I shall have to add a new length and see whether that cures it. Otherwise I shall take out injector four and check that closely.
Click to expand...

You need a window socket to get it out so you don't crush the wire - which is what seems to have happened.
 
You must log in or register to reply here.

Similar threads

Rubberknees
Top gasket seal for P38 diesel FIP
Replies
8
Views
276
Rubberknees
Rubberknees
Flossie
P38A On going leak off issue, driving me mad!
Replies
14
Views
1K
Flossie
Flossie
jimmacD
Back to the P38 house of pain!
2
Replies
21
Views
2K
Grrrrrr
Grrrrrr
Randometer
300 TD Engine - Fuel Injection Leak - Help.
Replies
10
Views
1K
Randometer
Randometer
F
2001 P38 2.5 Diesel EKA Via NANOCOM
2
Replies
35
Views
2K
Datatek
Datatek
Back
Top