You need a proper balljointsplitter ,one that won't destroy the dust cover on the joint.see item 5060504000727 on eBay to see what I mean.
Try eBay UK, work's for me and will give you an idea what to look for.
You've one too many numbers there...at a guess prolly one of the trio of zero's.
Just tried it again,5060504000727and it works for me., morning sausage.
Ebay item numbers are 12 digits...your number somehow links to this item, but the number is different when you scroll down.Just tried it again,5060504000727and it works for me., morning sausage.
Your quite right sausage, I've just put the number I posted in and the item I wanted to show appears but when you scroll down it gives a new item number of 124340226626.Ebay item numbers are 12 digits...your number somehow links to this item, but the number is different when you scroll down.
Morning.
https://www.ebay.co.uk/itm/124340226626?epid=11024967521&hash=item1cf3414a42:g:XugAAOSwI4Ng0JXq&amdata=enc:AQAHAAAA4F/a0LITlRLQaIEqnRknQvA/AtF9qa3SxfYkHVd5/UOGQBNrt7AJUJ1TDXUpAivkPuEQjio8GKZEumrbIBb0UinYpEXy2NDN/MQ0MabkGf+0w11QQ2IjPh9YJmu1MwtRXC3jE8P6P+fO2QB5J/jrmtoDy9hFcga7+5JoF6qf5wbFwGEObB9FKzHraN3tsEe7gKYkLFEg0Mhnim6BIboE1aPk5FfFiCK1Tr/5u9fT7USwHa92Whuifgovtt8faXB++vDA8LbIIp1u2hIdZWTXBvrXN55CMCLo055XXs8abfiX|tkp:BFBM6vHYwbRg
Relisted item probablyYour quite right sausage, I've just put the number I posted in and the item I wanted to show appears but when you scroll down it gives a new item number of 124340226626.
For the swivel, two hammers on either side at same time, plus the wedge splitter hammered in tight to pre-load the taper. Check which joint is more wobbly, and do the other one first. That way the swivel has movement to allow the taper to move.
. Question is if the new balljoints will be seated correctly or if the bore is to big?? Or is it maybe not considered as a balljoint change as they only been there for a week and driven 1 timeFrom memory so I may be wrong,only one is a balljoint and the other is a swivel pin.I assume the top balljoint is trashed? No idea why it came out like that or why its so god damn stuck
are there two different part number for the top and bottom? Just checked and lower joint is FTC3571and upper is FTC3570From memory so I may be wrong,only one is a balljoint and the other is a swivel pin.
I wouldn't take the chance, you don't know what damage you've done.think it should be a turning motion rather than a vertical movement, sorry @Rubberknees .
Welcome To LandyZone, the Land Rover Forums!
Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.
Registering is free and easy just click here, we hope to see you on the forums soon!
