Tony e
Well-Known Member
- Posts
- 999
- Location
- Bolton UK ont side of wintery il
If this jb stuff dont hold im gona cold stick it with some 77 cast rods. 80 - 130 amp
p38 2.5 to ?
- Thread starter Tony e
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
myfirstl322
Well-Known Member
- Posts
- 41,354
- Location
- Hoots mon...
There is a more traditional way to stitch cast iron but fs, newest is betterer right.
Tony e
Well-Known Member
- Posts
- 999
- Location
- Bolton UK ont side of wintery il
A good jab with a rod is best but it takes time. And its a bastid on yer back 
myfirstl322
Well-Known Member
- Posts
- 41,354
- Location
- Hoots mon...
Noooo, not rods.
Stitching.
Stitching.
Tony e
Well-Known Member
- Posts
- 999
- Location
- Bolton UK ont side of wintery il
Rods. Short runs. Lots of amps.
They dont like it upem you know
They dont like it upem you know
myfirstl322
Well-Known Member
- Posts
- 41,354
- Location
- Hoots mon...
Fuzzy wuzzy's don't like Cold steel
Tony e
Well-Known Member
- Posts
- 999
- Location
- Bolton UK ont side of wintery il
Cold weld. Cast rods.
Burnt shirt. Smoldering chest hair
Burnt shirt. Smoldering chest hair
myfirstl322
Well-Known Member
- Posts
- 41,354
- Location
- Hoots mon...
Yeah watch your blouson,
I knew a guy who properly burnt his whatchamacallitskin.
I knew a guy who properly burnt his whatchamacallitskin.
Tony e
Well-Known Member
- Posts
- 999
- Location
- Bolton UK ont side of wintery il
1/2 inch stitches from end of crack to core plug end i think
Tony e
Well-Known Member
- Posts
- 999
- Location
- Bolton UK ont side of wintery il
Drilling the stop hole at the end might be a prob. Will see how the jb holds first
300bhp/ton
Well-Known Member
- Posts
- 5,009
- Location
- Near MK
Lol. chipped or not. It's still less powerful than any other the stock engines available though.My 2.5 can in no way be described as under powered. Mind you it is chipped, but If you want a racing car buy a Porsche.
- Posts
- 58,170
- Location
- Preston Lancs.
A chipped M51 should be powerful enough for anyone. As said if you want a racing car buy a Porsche.
ovalandrover
Well-Known Member
- Posts
- 1,610
dosen't need a new propshaft as the 22 box has a spacer in it that takes up the extra length of the 24 box its basically a straight swap over using the diesel torque converter and bell housing. On the earlier 24 boxes the front pump may have to be changed over as well.
Tony e
Well-Known Member
- Posts
- 999
- Location
- Bolton UK ont side of wintery il
Thanks for the info. I'm trying the bandade first then May be a stitch or five before I go for the full open heart surgery route. If it gets to that I may need your knowledge quite a lot
