Oily Leak & Misfire Confusion
- Thread starter Doo
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Tony e
Well-Known Member
- Posts
- 999
- Location
- Bolton UK ont side of wintery il
Defo to small. Mines at front of n/s/f inner wing in open air but had to put a lecy fan on for towin the van. Probably best to get a proper one. It is a P38 and its only money ( pit )
Tony e
Well-Known Member
- Posts
- 999
- Location
- Bolton UK ont side of wintery il
The most anoying thing was that the rad had 4 holes for mounting a fan allready there so why didnt LR fit one in the first place
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
£££££££
- Posts
- 58,170
- Location
- Preston Lancs.
They did on later models.
- Posts
- 58,170
- Location
- Preston Lancs.
Found the generic cooler.
Does this look like it will do the job??
Slightly off topic, although not entirely.... I had this Halfords box ratchet for years, but it died a while back. So today, I took it in and took it apart and found the problem was rust had seized the moving parts. I took the sandpaper and ripped the rust clean off. Seeing as how I was in the kitchen, I may have borrowed some olive oil and lubed up the now moving parts. I am chuffed to bits to report that I got that old thing working beautifully again
Just don't tell her I used her clean kitchen
Nothing like big enough look for ESR2276 or UBC100580 on fleebay.
brianp38dse
Well-Known Member
- Posts
- 20,067
- Location
- heathrow
The cooler looks about the same size as the one on my old Cortina and that's only got a 1500cc motor.
