defenderdavie
New Member
- Posts
- 1,981
- Location
- south east scotland
oi daft
- Thread starter defenderdavie
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 83,300
- Location
- Embasinga stocæ
interesting stuff, Davie - yu int taken the complete top hat section off then, to replace the vertical section of the inner wing?
I take it yu are going to patch the horizontal bit, otherwise yu mite need to replace the battery tray.
I found the best way to replace the bottom of ther "A" pillar was to cut the relevant bit off a scrapper.
Been out and busy for a day or so, so just seen yo thread. Keep up th egood work
.
I take it yu are going to patch the horizontal bit, otherwise yu mite need to replace the battery tray.
I found the best way to replace the bottom of ther "A" pillar was to cut the relevant bit off a scrapper.
Been out and busy for a day or so, so just seen yo thread. Keep up th egood work
.
defenderdavie
New Member
- Posts
- 1,981
- Location
- south east scotland
i might have to take the top hat of on one side and i might need to redo the baterry tray as well as thers loads o rust under itinteresting stuff, Davie - yu int taken the complete top hat section off then, to replace the vertical section of the inner wing?
I take it yu are going to patch the horizontal bit, otherwise yu mite need to replace the battery tray.
I found the best way to replace the bottom of ther "A" pillar was to cut the relevant bit off a scrapper.
Been out and busy for a day or so, so just seen yo thread. Keep up th egood work
due to a poor repair before i bought it as to the door pillar ive done another fred on that cos im trying to make 1
ill let you know how i get on
- Posts
- 83,300
- Location
- Embasinga stocæ
I have a drawing of the bottom of the door pillar if I can find it. Be forewarned - it is double skinned. Do you need to replace any of the inner a post? I will email ya later.
martinl
Active Member
- Posts
- 273
- Location
- Bilston, West Midlands
defenderdavie
New Member
- Posts
- 1,981
- Location
- south east scotland
ive ended up having ter cut away most of both skins (i think)
and has to cut out some of the inside (ie inside foot well as well as a bit o floor and some sill
think ill stick to mi tracters in future
im thinking about giving it its own fred as its taken on a life of its own
kids ave even started calling it fred the shed
ended up taking some of the carpet out to get ant other site
so after work this week im gonna strip the interior and deal with ever single bit o rust
then weld the lot
- Posts
- 83,300
- Location
- Embasinga stocæ
i think this is its own fred - int it?
defenderdavie
New Member
- Posts
- 1,981
- Location
- south east scotland
ill need ter stick in a link ter mi metal work fred and mi headlinig fred though
http://www.landyzone.co.uk/lz/f16/had-my-first-attemt-metal-work-today-69016.html
http://www.landyzone.co.uk/lz/f8/removing-headlining-68912.html
- Posts
- 83,300
- Location
- Embasinga stocæ
yu seen my rebuild fred - aint ya? Yu can see wot I had to cut away.
hope yu aint doing it outside?
hope yu aint doing it outside?
defenderdavie
New Member
- Posts
- 1,981
- Location
- south east scotland
i aint seen yer fred any chance o a link
im doining it in mi garage thank f%&k aint got much space but ill manage
- Posts
- 83,300
- Location
- Embasinga stocæ
pm on way - sent yu a couple of (hopefully) useful links.
I is doing mine outside - hence lack of enthusiasm and ages to do anything.
I is doing mine outside - hence lack of enthusiasm and ages to do anything
.
defenderdavie
New Member
- Posts
- 1,981
- Location
- south east scotland
my latest problem on the welding front is once i striped out the dodgy repair work (rivited in and sealed over) i found it had been welded under neath with another dodgy repair and who ever had done it hadnt sorted the rust so ive now got ter cut that out anorl cos the rusts been sandwiched between two seperate repairs and left ter fester
pics ter follow when i get home later
pics ter follow when i get home later
defenderdavie
New Member
- Posts
- 1,981
- Location
- south east scotland
daft cheers fer yer FWD been practicin welderisin
ive decided on a clarke 151te gas mig that can be converted ter tig ( fer if ma brother will weld fer me ) £280 incl vat frae machine mart anyone opinions
ive decided on a clarke 151te gas mig that can be converted ter tig ( fer if ma brother will weld fer me ) £280 incl vat frae machine mart anyone opinions
