not quite right

since ive had me new clutch fitted,which they took the engine out to do and they replaced the engine mounts aswell although the tickover seems ok the whole landy no vibrates the dash and the metal bulkead all now have rattles and even when my boy was in the back he asked why his seat was shaking.it never done this before and it is very noticeable when at a standstill at lights etc.any ideas what could cause this

stiffer/working engine mounts? Adjust the tickover up a smidge

will try that ta

I have had the exact same problem it is your engine mounts if you compare you previous ones to your new ones you will notice that the new ones have three plates in between the rubber sections instead of two hence harder and making the landrover vibrate, it took my months to figure this out after completely rebuilding my engine, hope i have helped Joe