not having much look with my little 90

G

garygledhill

Member

Posts

98

Location

halifax illingworth

• Dec 24, 2012

• #1

after buying my self a little 1987 2.5 na 90, wen i bought it i bought it knowing it needed a new clutch n few other bits after doing, this then the indicators stopped working and found it was the flasher unit now fixed that the heater stopped working now temps are ok ect ? and went to go out in it today for a driver took hand brake off and it wunt move went in gear and itwas trying to pull away i tryed it in revere and was same was asif the handbrake was still on stopping it moves and the handbrake felt asif they was nout their was right easy to take of anyone have any ideas what this could be

 

harlequin

New Member

Posts

176

• Dec 24, 2012

• #2

Hand brake shoes stuck to drum. **** with hammer or use clutch to force it off

 

top-cat

Well-Known Member

Posts

1,540

Location

Doncaster area

• Dec 24, 2012

• #3

ive had this problem for the last 3 years with mine, ive replaced the whole hand brake system.its sorted now ive slackened it off so it doesnt work. it doesnt stick now

 

C

***CrAiG***

New Member

Posts

221

Location

liverpool

• Dec 24, 2012

• #4

Because yours has drums on the rears too the shoes like to stick inside the drums, mine does this everytime I park up after driving in the wet and then leaving for a few days. I just put it in gear and snatch it forward off the clutch, normally frees itself after 2-3 gentle tries and is fine then.

 

warrior

Well-Known Member

Posts

3,408

Location

Leeds

• Dec 24, 2012

• #5

If your going to hit it with a hammer ( the hand braked drum) then chock the wheels if you in a hill,

 

G

garygledhill

Member

Posts

98

Location

halifax illingworth

• Dec 24, 2012

• #6

ok cheers fellas i will have ago with that n yeh will have to chock wheels up 2 it and hopefully it will work n can start driving it once sorted heater out 2

 

O

owenmi01

New Member

Posts

70

Location

Oldham, UK

• Dec 25, 2012

• #7

I have also had is happen on my old ex mod 90... I just took the centre panel out from the seat panel and used a lump hammer on the hand brake drum....

Being ex army it had been done many times before and brake drum showed lots of hammer marks..

I then just used to drive it occasionally with the hand brake on ever so slightly.. It either dried everything out nicely from the heat generated or cleared any surface rust from the matting surfaces...

Get your lump hammer on it mate !

 

Oldseadog

Well-Known Member

Posts

9,270

Location

Tynemouth

• Dec 25, 2012

• #8

Yer in Illingworth and you got a Landy, and you want the heater to work, and yer brakes are sticking, and yer haven't ****ted it yet!!!

I love an optimist!

Point it down the hill to Mixenden and if that don't free yer brakes off, then nothing will ... Either that or drag it up to Ogden, coz there's plenty of hill going to the reservoir!

 

G

garygledhill

Member

Posts

98

Location

halifax illingworth

• Dec 26, 2012

• #9

All sorted now just put it in gear set off n just put bit more gas on it then went backwards it was fine took for a drive round block. Just heater to sort out tomorrow if I get time