no petrol to plugs 1996 4.6 gems.
- Thread starter wooly123
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
Have we elimated the crank sensor yet?
wooly123
Active Member
- Posts
- 155
- Location
- rye east sussex
i think so Grrrr,i am going to make sure tommorow if it is not raining thanks
wooly123
Active Member
- Posts
- 155
- Location
- rye east sussex
hi, i have looked under car, at the inspection cover,and notice that the tip of the crankshaft sensor ,inbetween the timing ring is about 5m 1/4 inch in, does anybody know if this is correct,please,i have done security learn,and it has said yes mobilised,still wont start,thanks for any help. 4.6 gems 1996 petrol
- Posts
- 58,170
- Location
- Preston Lancs.
wooly123
Active Member
- Posts
- 155
- Location
- rye east sussex
i would say it was 1/4" 6.35 Wammers,thankyouJust out of interest 5mm is just over 3/16" or so 1/4" is 6.35mm.
- Posts
- 2,101
- Location
- Mull of Kintyre
My CPS is at about 2 o clock looking from front of car, Can it be seen from inspection cover on bottom of bellhousing?
- Posts
- 16,479
The CKP should sit with a spacer on the mounting bracket to set it at the correct gap.
wooly123
Active Member
- Posts
- 155
- Location
- rye east sussex
there is two inspection plates,you can see it through the plate behind sump ,the one with about six bolts,
wooly123
Active Member
- Posts
- 155
- Location
- rye east sussex
i wonder if i have the correct spacer,thanks
- Posts
- 2,101
- Location
- Mull of Kintyre
Oh right not tried the other
