New seat belt issue

S

sprie

Active Member

Posts

218

• Oct 3, 2024

• #1

I have just bought some securon seat belts. I was just about to install them but when I tested them, I could not get the belt to pull out from the automatic reel. I have tried very slowly pulling out, also trying letting it in a bit first. I have tried the reel in different orientations. The instructions say nothing about this. Before I go back to suppliers, has anyone else had this issue? I have it on both reels.

 

A

Anaconda

Well-Known Member

Posts

3,554

Location

Thames Valley

• Oct 3, 2024

• #2

Some will only work in a certain orientation but since you have tried that I guess they must be faulty.

 

S

Shedload

Well-Known Member

Posts

368

Location

Liverpool

• Oct 5, 2024

• #3

When you tried them where they secured on a flat surface ?
They can be very temperamental in their orientation.

 

S

sprie

Active Member

Posts

218

• Oct 7, 2024

• #4

you are right. when i mounted them, they are at a slight angle and if i angled it a tiny bit more, they got stuck. when i moved it a tiny bit back, they were fine.
so good to go now.