New Project Arrives
- Thread starter Foxyred
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
alexc2701
Active Member
- Posts
- 680
- Location
- Nottingham
Very impressed. Do you know how much you spent? I bet it's one of few that is like profitable haha
Frosted
Active Member
- Posts
- 156
- Location
- North of london
Very nice!
Gives me inspiration to keep going
Gives me inspiration to keep going
Last edited:
Been out for a 2hr test and sort tonneau from Trent covers at Harby .Car ran well accelerator slightly hesitant due to over tight mounting.
While travelling from A46 to Harby I was followed by a 110 and a green 90 with white roof had a little convoy, wonder if they are on here.
Will post pics when cover is made a week on Saturday.
While travelling from A46 to Harby I was followed by a 110 and a green 90 with white roof had a little convoy, wonder if they are on here.
Will post pics when cover is made a week on Saturday.
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
Tonneau made at Trent Covers, Harby, Leicestershire. Made while I waited on Saturday morning, chap was very nice and kept making me tea
Interesting, PVC?
what is it like at 70???? does it billow /flap etc?
Cheers
Yes its PVC although I could have had anything, wife did not want cloth as she used to have a MG Midget and did not like the fact the Black Mohair faded and was hard to clean.
Not had any flapping or noise at 70 it has four 1/4 turn fixings on the rail behind the cab and between the spare wheel also has bars under it.
At less than £100 +vat I think its good value
Not had any flapping or noise at 70 it has four 1/4 turn fixings on the rail behind the cab and between the spare wheel also has bars under it.
At less than £100 +vat I think its good value
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
steveyorks
Well-Known Member
- Posts
- 827
- Location
- west yorks
I am so impressed with you rebuild and the write up you have done. Its really inspirational to the rest of us as well as being very interesting.
SpenB
Member
- Posts
- 89
- Location
- Scottish Borders
Hi, How do you go about getting the agreed value from Admiral? and special requirments?
alexc2701
Active Member
- Posts
- 680
- Location
- Nottingham
I was looking at the sets the other day none of them seem like too good a fitting! Actually contemplating making (getting someone else to stitch me) a leather seatbox cover could cut to suit for one. Surprised noone has tried. If turns expensive might try getting a carpet fitted rarther than the sets
Exmoor carpet set started to be fitted today,
Been in the carpet and flooring trade 30 years and not impressed with the quality of the cuts for the price.
Very impressed with finish by the way
SpenB
Member
- Posts
- 89
- Location
- Scottish Borders
Thanks Foxy
Similar threads
