- Posts
- 34,072
- Location
- North Shropshire
Yes, it was before the COVID thing, so quite a while ago. Not noticed an issue since then with nano talking etc.
P38A New P38 EAS
- Thread starter oakey
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Though thinking about it, it does self level so relay must still be connected.
- Posts
- 34,072
- Location
- North Shropshire
Need to check for dirty connections etc in the A pillar and obd port
Datatek
Well-Known Member
- Posts
- 45,061
- Location
- Near Poitiers SW France
No EAS comms with the relay removed or with a standard relay fitted,
- Posts
- 2,101
- Location
- Mull of Kintyre
Cleaned the contacts under the seat but they looked ok. Seriously thinking of replacing all the sensors cos then I know whats been done
awkwardbob
Well-Known Member
- Posts
- 592
- Location
- Glasgow
Hi, sorry to jump on the thread -I’m having similar trials with my EAS so replacing a reported faulty rear sensor and re-built my valve block.
Just wanted to check where these potentially corroded white connectors might be in the passenger area -are they under the carpet ?
Thanks
Bob
Just wanted to check where these potentially corroded white connectors might be in the passenger area -are they under the carpet ?
Thanks
Bob
- Posts
- 12,669
- Location
- Sud ouest France !
Passenger footwell behind the kick plate standing vertically to the left 
Scotiawhiskers
Well-Known Member
- Posts
- 887
- Location
- Manchester
Otto doesn't adjust height / self level and gives beeps and 35mph max message if driven with the under passenger seat relay taken out.
- Posts
- 12,669
- Location
- Sud ouest France !
If the relay is removed the system is shut down full stop. No anything happens.
Similar threads
