New Gearbox

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
pikefly

pikefly

Active Member
Posts
124
Location
Derbyshire
I am about to fit a reconditioned gearbox and transfer box to my Series 3 but I am told that I cannot just slot the overdrive into the new unit and something has to be done before it can be fitted (not just a gasket). Can anyone enlighten me as to what this is please?
 
Sounds incorrect mate. Once the box is in just take off the rear plate on the transfer box and fit the overdrive in (after taking off the nut etc etc).

Rich
 
pikefly said:
I am about to fit a reconditioned gearbox and transfer box to my Series 3 but I am told that I cannot just slot the overdrive into the new unit and something has to be done before it can be fitted (not just a gasket). Can anyone enlighten me as to what this is please?
Click to expand...
I think there is a fitting or cog or something that goes into the transfer box isn't there? It would have been on your old one if you had the OD unit fitted.
 
Think you remove the plate covering the pto, remove bearing from shaft and refit to overdrive then slide it in and bolt it up. Can be done under the landy
 
Thanks Gun.
The company I bought the new box from have been very helpful. They think the overdrive is so old its messed up second gear - it jumps out in second under engine braking. I'm taking it back to them so they can have a look at it and possible rebuild. We'll see!
Cheers
Tim
 
You must log in or register to reply here.

Similar threads

D
Gearbox and Transfer Case Gasket and Seal Kit - 3 Brothers
Replies
1
Views
344
lynall
L
Tig-man
Tax Exempt, modifications question
Replies
13
Views
438
300bhp/ton
300bhp/ton
C
Gearbox fragments
2
Replies
25
Views
2K
Chonker
C
N
Discovery auto gerabox issues
Replies
19
Views
1K
marjon
marjon
P
FL2 SD4 Auto Gearbox Swap
Replies
2
Views
403
Hippo
Hippo
Back
Top