P38A Nanocom problems

Hmm slightly miffed, seems i've bought a £438 pound paper weight.

It won't communicate with the EAS ecu "unable to start communications with the ECU"


footwell connectors spring to mind for some reason?

thanks

Henry_b said:

Hmm slightly miffed, seems i've bought a £438 pound paper weight.

It won't communicate with the EAS ecu "unable to start communications with the ECU"


footwell connectors spring to mind for some reason?

thanks

Click to expand...

OBD port is the first thing to look at, there are two dedicated EAS wires. After that, the footwell connectors

Henry_b said:

Hmm slightly miffed, seems i've bought a £438 pound paper weight.

It won't communicate with the EAS ecu "unable to start communications with the ECU"


footwell connectors spring to mind for some reason?

thanks

Click to expand...

Delay relay in place?

Grrrrrr said:

Delay relay in place?

Click to expand...

I've come across that in the past where it's been swapped for ordinary relay

yep all intact

Bad contacts on diag port connector ? My blue P38 does the same, where several ECU's don't connect unless I hold the plug at an angle. I need to replace the socket like I did on my green P38.

I just ordered one of these for my Blue P38. I was considering using an OBD extension cable & locating the socket in the cubby box for easier access, but that can wait for another time.

pwood999 said:

I just ordered one of these for my Blue P38. I was considering using an OBD extension cable & locating the socket in the cubby box for easier access, but that can wait for another time.

Click to expand...

If the OBD connector ever need replacing on mine, I will fit a "D" connector in the glove box.

Datatek said:

If the OBD connector ever need replacing on mine, I will fit a "D" connector in the glove box.

Click to expand...

I sort of agree given the better quality, but in my case I generally use different diagnostics for engine stuff, simply becasue Nanocom is a bit slow showing dynami sensors such as O2.

In your case very few diag tools work on that engine, so D connector is probably better !!