My First 90

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
My Old Landy said:
I expect the clutch is fine as it seems strong. The master looks ok but the cap breather hole is blocked.
Even if I don't change the master, I think I will buy one 'just in case' :D
I hope you get your bearing fixed! When is the next trip as I am eager to do more than a quarter of the adventure :rolleyes:
Click to expand...

What gun did you go for? I'm going to treat myself to the dewalt next year when it's on offer
 
This was from the laning trip :)
upload_2018-11-25_16-5-31.png
 
resto_d1 said:
What gun did you go for? I'm going to treat myself to the dewalt next year when it's on offer
Click to expand...

I have the dewalt. I got it with the standard push ball instead of the hog ring. It’s a beast of a tool. It undone the main crank bolt on my 200tdi. That is an impressive task in itself, but the engine and gearbox were on a pallet out of the chassis, so nothing to really “lock” the engine. From personal experience, I wouldn’t bother with the deals they have on for a 5.0A battery, not for £150+ anyway! I got 2 off 3.0A batteries for around £30 each from B&Q, use one and charge one while working.
 
I can get the clutch sorted this weekend as the parts arrived today :) and I have just ordered a whole bunch of spares that should keep me busy over Christmas!!

:D:D:D
 
mick 1986 said:
I have the dewalt. I got it with the standard push ball instead of the hog ring. It’s a beast of a tool. It undone the main crank bolt on my 200tdi. That is an impressive task in itself, but the engine and gearbox were on a pallet out of the chassis, so nothing to really “lock” the engine. From personal experience, I wouldn’t bother with the deals they have on for a 5.0A battery, not for £150+ anyway! I got 2 off 3.0A batteries for around £30 each from B&Q, use one and charge one while working.
Click to expand...
Xr? Cheers for heads up
 
mick 1986 said:
Yeah I think it’s XR. It’s the 18V batteries, but they can be used on the newer 12V gear.
Click to expand...

My mate swears by dewalt and it's about right mid price range. I didn't see you'd replied until today. I think I'll go for one! So you bought the bare unit then a charging set and batteries from b&q? Thanks for info
 
resto_d1 said:
My mate swears by dewalt and it's about right mid price range. I didn't see you'd replied until today. I think I'll go for one! So you bought the bare unit then a charging set and batteries from b&q? Thanks for info
Click to expand...

I already had access to a charger, so went for the bare unit. The batteries were from B&Q, as they sell the 3.0Ah battery for around £35. I wouldn’t work on a vehicle without it now. I don’t use it for tightening up, but no problem with buzzing out tight bolts.
 
I'm still on all the welding/bodywork at the moment but have struggled with the odd suspension arm bolt. I think I'll get one in a couple months once I get onto the mechanical side of the build lol. Cheers
 
You must log in or register to reply here.

Similar threads

Cheesebob
New owner
Replies
11
Views
939
Cheesebob
Cheesebob
B
3rd new front diff reqd in 5 years
Replies
16
Views
1K
300bhp/ton
300bhp/ton
S
Hello from southeast
Replies
1
Views
539
Mark Piercy
Mark Piercy
UpandOver
Blood, sweat & beers ! 1984 Defender 90 restoration
3 4 5
Replies
89
Views
9K
UpandOver
UpandOver
M
Freelander 2 (LR2) freelander 2 diff swap
Replies
3
Views
221
mick g.
M
Back
Top