Mine must be nearing renewal and also fancy a bash at some 11 inch Borg and becks. I spoze I should try scraping the Vaseline off the old ones first but at least they don’t bind.Still on my to-do list to fit at the mo, life has been getting in the way on my days off and the new shoes are still sat in their boxWeather isn't helping my enthusiasm either....
Unusual for Britpart cylinder to be steel .Only done a few miles and there's already an improvement.
View attachment 225523
These are the one I took off
View attachment 225524
And these are the new ones. Note the rusty slave cylinder. Britpart less than 10 months old, so that'll be getting replaced with a girling one.
I've managed to stamp on the brakes and lock the fronts up so hopefully once they are bedded in and readjusted they should be OK.
Thanks all who contributed
I’d check your engine oil. If it’s not running as far as the wheels your probably out of it.Only done a few miles and there's already an improvement.
View attachment 225523
These are the one I took off
View attachment 225524
And these are the new ones. Note the rusty slave cylinder. Britpart less than 10 months old, so that'll be getting replaced with a girling one.
I've managed to stamp on the brakes and lock the fronts up so hopefully once they are bedded in and readjusted they should be OK.
Thanks all who contributed
That's another job on the waiting list
Welcome To LandyZone, the Land Rover Forums!
Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.
Registering is free and easy just click here, we hope to see you on the forums soon!
