Disco 3 (LR3) Mot fail

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
gstuart

gstuart

D3 Grandad
Full Member
Posts
30,766
Location
Kent
So alas mine failed yesterday and looks like it may be the end of the line

Brakes pipe from the air tank to the rear need replacing and the drivers side sill has rotted out , on top the rear lower wishbones

The mot station is going to drop it back off to me either today or tomorrow on a flat bed

Know it sounds daft but absolutely gutted after all the hard work

expect the work would be around 1k to just get it passed the MOT then the rear lower arms on top at a later date so would add an extra 7-800

Once back home I’ll be able to pull the plastic cover off to see the extent of the rust

IMG_2394.jpeg
 
Massive thk u as always

Once it comes back I’ll strip the plastic sill covers off to see how bad it is and get some pics

See new sill plates are around £72 each side

Know if it goes into the seat belt area it’s game over , but won’t worry u til I know more

Can’t thk everyone enough as it means a lot and will of course keep this updated once I get it back and take some pics
 
Many thks , spoke to the mot guy and he said it was the drivers sill

Really hope it’s not spread into the inner one as that I feel would be game over

Indeed will know more once I get it back and get the covers off

Don’t mind admitting my foot will be in my mouth as I peel the covers off

Wished to add that I’m so very grateful to everyone for the fantastic help
 
Found an interesting video and was shocked how far the rust can travel , along with the guy buying second hand panels cut off another d3

From what I’ve read leaves and mud that’s behind wheel arch liners causes issue along with side steps

My rock sliders are bolted on to the chassis via large brackets as I assume the ones fitted to the sills allow water to wick down the bolts and to the inside of the sills

 
Here goes, neighbour very kindly got the sill cover off 😭😭
 

Attachments

  • IMG_2947.jpeg
    IMG_2947.jpeg
    709.9 KB · Views: 52
  • IMG_2945.jpeg
    IMG_2945.jpeg
    410.8 KB · Views: 56
  • IMG_2944.jpeg
    IMG_2944.jpeg
    455.6 KB · Views: 49
  • IMG_2941.jpeg
    IMG_2941.jpeg
    345.4 KB · Views: 51
  • IMG_2940.jpeg
    IMG_2940.jpeg
    379.7 KB · Views: 51
  • IMG_2939.jpeg
    IMG_2939.jpeg
    379.7 KB · Views: 55
  • IMG_2938.jpeg
    IMG_2938.jpeg
    407.5 KB · Views: 52
  • IMG_2936.jpeg
    IMG_2936.jpeg
    354.4 KB · Views: 51
  • IMG_2935.jpeg
    IMG_2935.jpeg
    417.3 KB · Views: 51
  • IMG_2934.jpeg
    IMG_2934.jpeg
    392.9 KB · Views: 54
  • IMG_2933.jpeg
    IMG_2933.jpeg
    401.4 KB · Views: 51
  • IMG_2932.jpeg
    IMG_2932.jpeg
    399.4 KB · Views: 51
  • IMG_2930.jpeg
    IMG_2930.jpeg
    331.6 KB · Views: 58
  • IMG_2929.jpeg
    IMG_2929.jpeg
    364.5 KB · Views: 50
  • IMG_2927.jpeg
    IMG_2927.jpeg
    276.1 KB · Views: 45
  • IMG_2926.jpeg
    IMG_2926.jpeg
    477 KB · Views: 48
  • IMG_2925.jpeg
    IMG_2925.jpeg
    480.2 KB · Views: 47
  • IMG_2924.jpeg
    IMG_2924.jpeg
    436.8 KB · Views: 49
  • IMG_2919.jpeg
    IMG_2919.jpeg
    324.4 KB · Views: 53
  • IMG_2917.jpeg
    IMG_2917.jpeg
    327 KB · Views: 50
DanClarke said:
Oh mate that looks dire. I don't think it will buff out.
Are the sections available and can you do the welding or do you know someone that can?
Click to expand...

Must confess my heart dropped

Suppose the positive note is the chassis is solid, rust hasn’t gone into the rear wheel arch or the floors or mounting points

Indeed u can get the inner and outer sills for around £200 , alas is all spot welded and I wouldn’t be able to take it on

Have been recommend to several mobile welders

I’ll try and get some pics full length in the day time as had to wait for my neighbour to get home who very kindly got them off for me
 
gstuart said:
Must confess my heart dropped

Suppose the positive note is the chassis is solid, rust hasn’t gone into the rear wheel arch or the floors or mounting points

Indeed u can get the inner and outer sills for around £200 , alas is all spot welded and I wouldn’t be able to take it on

Have been recommend to several mobile welders

I’ll try and get some pics full length in the day time as had to wait for my neighbour to get home who very kindly got them off for me
Click to expand...
As you say, not as dire as it could have been. Best of luck with it all mate!
 
Stanleysteamer said:
As you say, not as dire as it could have been. Best of luck with it all mate!
Click to expand...

Thks mate

Am pleased with the dinitrol treatment of the chassis as it’s solid with no rust marks what so ever so that’s a bonus and proves it works seeing it’s right next to the sill area

Suppose next port of call, is to see what the mobile welders says

Plus looking at the outer part I wonder if these come off as see the plate ends along the red line


IMG_2952.jpeg
 
gstuart said:
Thks mate

Am pleased with the dinitrol treatment of the chassis as it’s solid with no rust marks what so ever so that’s a bonus and proves it works seeing it’s right next to the sill area

Suppose next port of call, is to see what the mobile welders says

Plus looking at the outer part I wonder if these come off as see the plate ends along the red line


View attachment 327451
Click to expand...
What are they? some sort of plastic plugs? If said welder is going to need to get inside won't you need to get them out anyway?
 
You must log in or register to reply here.

Similar threads

M
Advice on replacing both rear toe spindle links on Disco 4
2
Replies
29
Views
1K
Anaconda
A
F
Disco 2 MOT failure
Replies
14
Views
1K
frank1093
F
frostythor
My Last MOT
Replies
1
Views
531
lynall
L
G
Disco 4 (LR4) D4 selling advice/testing the water
Replies
7
Views
1K
Calrissian
C
gstuart
Disco 3 (LR3) Insurance renewal plus mot
2 3
Replies
44
Views
5K
gstuart
gstuart
Back
Top