Freelander 1 Measuring yer wheel fred

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Are Freelander's brillant

  • Yes

    Votes: 4 30.8%

  • Yes, they're amazing

    Votes: 3 23.1%

  • Yes, they're fntasic

    Votes: 5 38.5%

  • Freelander's rule

    Votes: 4 30.8%

  • I just wanted to vote yes

    Votes: 4 30.8%

  • Yes and bob option - he's ***

    Votes: 2 15.4%

  • Yes and Warmmers is trolling our fred

    Votes: 4 30.8%
  • Total voters
    13
  • Poll closed .
dfossil said:
That works for me - I just checked my TD4 Auto at 2500 revs 70mph - that converts to 84 at 3000 - your chart says at 3000 I should be doing 79
If I take 84/1.46 x 1.36 I get 78mph at 3000 - close to your chart - which gives another confirmation that my particular 2005 TD4 HSE has the v6 IRD
The Tomtom was confirming the roadspeed to within 1 mile/hr - I don't know where in these cars the road speed sensor is in the geartrain but it suggests that the thing is calibrated right for what it can see of my geartrain from wherever it is to the road.
Click to expand...

Only thing it means is that the auto has a higher final drive ratio than the other variants. KV6 3.66 to 1. TD4 manual 3.182 to 1. TD4 auto 2.91 to 1. Does it still work for you? :D:D
 
You know what - as you clearly did not follow the argument through and missed the point of the post - I think I'll leave it at that - Chill - 'bye
 
dfossil said:
You know what - as you clearly did not follow the argument through and missed the point of the post - I think I'll leave it at that - Chill - 'bye
Click to expand...

Bye. You may like to know that a TD4 auto travels at 26.6 MPH per 1000 RPM in top gear. So 2500 RPM = 66.5 MPH. 3000 RPM = 79.8 MPH. If it had a V6 IRD the speeds would be 2500 RPM 57.25 MPH and at 3000 RPM 68.7 MPH.
 
Last edited:
dfossil said:
You know what - as you clearly did not follow the argument through and missed the point of the post - I think I'll leave it at that - Chill - 'bye
Click to expand...
Please continue to be part of the fred and post the measurements I asked for, and just don't reply or answer him.
 
This fred has gone oft the rails. It's obvious why.
Can I make the suggestion we continue posting our measurements as per the first post request, and ignore him and don't reply to him anymore. This will give the fred the chance it needs to progress and continue.
Thank you.
 
wammers said:
Good info is trolling. What is wrong with you people? :rolleyes::rolleyes:
Click to expand...

It was the fact that you did not follow the argument - or should I say calculation - through.

The overall ratio of a td4 Automatic gearbox is 1.993 in 5th - that of a KV6A is 2.507 - (source B34R's chart gearbox overall ratios)

That's a difference of 2.507/1.993 = 1.258 - Apply that to your 57.25mph @ 2500 rpm and you get 72mph - which is bloody close to what I measured.

So who had the good info? Actually we can all make mistakes so assuming it was meant well and not an attempt to carry on trolling then - I apologise for calling you a troll. (;-))
 
Wrong Wammers. The final drive ratio is set by the gearbox. So if the V6 IRD was fitted to a TD4 auto. Road speed per 1000 RPM would increase, not decrease.
 
dfossil said:
It was the fact that you did not follow the argument - or should I say calculation - through.

The overall ratio of a td4 Automatic gearbox is 1.993 in 5th - that of a KV6A is 2.507 - (source B34R's chart gearbox overall ratios)

That's a difference of 2.507/1.993 = 1.258 - Apply that to your 57.25mph @ 2500 rpm and you get 72mph - which is bloody close to what I measured.

So who had the good info? Actually we can all make mistakes so assuming it was meant well and not an attempt to carry on trolling then - I apologise for calling you a troll. (;-))
Click to expand...

The info came from a previous thread on here from 2013. https://www.landyzone.co.uk/land-rover/freelander-rpm-at-70mph.213553/
 
Hippo said:
This fred has gone oft the rails. It's obvious why.
Can I make the suggestion we continue posting our measurements as per the first post request, and ignore him and don't reply to him anymore. This will give the fred the chance it needs to progress and continue.
Thank you.
Click to expand...
Sorry Hippo for snapping at him but he boils my blood :(
I'm visiting the mother in law tonight to check her V6 tyre pressures so I'll measure the tyres at the same time.;)
 
Nodge68 said:
The MPH per 1000 RPM are assuming that the vehicle is in factory spec. Fitting the higher ratio V6 IRD to the TD4 auto would increase it's MPH per 1000 higher than 26.6 MPH listed in post 6 of that thread. ;)
Click to expand...


Nodge68 said:
The MPH per 1000 RPM are assuming that the vehicle is in factory spec. Fitting the higher ratio V6 IRD to the TD4 auto would increase it's MPH per 1000 higher than 26.6 MPH listed in post 6 of that thread. ;)
Click to expand...

No list in post #6. :D
 
Front of the V6 Freelander is
347mm
Rear is
353mm
Giving difference of 6mm
Sorry I forgot to mention pressure. This is 30 Psi all round.
 
Last edited:
More results from a different forum:

Front 347mm
Rear 354mm
Tyre size 215/65R16
Engine = Td4
Result = 354 - 348 = 8mm

Front 346mm
Rear 350mm
Tyre size 215/65R16
Engine = Td4
Result = 350 - 346 = 4mm

Front 347mm
Rear 353mm
Tyre size 215/65R16
Engine = Td4
Result = 353 - 347 = 6mm

Front 342mm
Rear 348mm
Tyre size 215/65R16
Engine = L series diesel
Result = 348 - 342 = 6mm

Front 348mm
Rear 352mm
Tyre size 215/65R16
Engine = L series diesel
Result = 352 - 348 = 4mm

Front 345mm
Rear 351mm
Tyre size 215/65R16
Engine = 1.8 petrol
Result = 351 - 345 = 6mm

Front 344mm
Rear 352mm
Tyre size 215/65R16
Engine = v6
Result = 352 - 344 = 8mm

Front 346mm
Rear 351mm
Tyre size 215/65R16
Engine = v6
Result = 351 - 346 = 5mm
 
You must log in or register to reply here.

Similar threads

C
Rear wheel bearings or diff
Replies
11
Views
1K
Nodge68
Nodge68
andyfreelandy
Other New Project starting today
Replies
3
Views
629
Alibro
Alibro
H
Freelander 2 whining
Replies
2
Views
426
HWel
H
N
Rear diff issues
Replies
5
Views
777
niko-h
N
F
rear wheel bearing question
Replies
3
Views
989
frenchdave
F
Back
Top