L322 Major problem

gold rover · Jan 29, 2020

RangeRoller dt said:
then Why is the roundabout older than PAS?
Surely they had to drive straight as they couldn’t turn the wheel?!?

Ok, now you're just being silly and I can't be bothered.

RangeRoller dt · Jan 29, 2020

gold rover said:
l is not harder to steer without pas, is making it up.

I must have made up the owners manual too then

RangeRoller dt · Jan 29, 2020

Your welcome

gold rover · Jan 29, 2020

RangeRoller dt said:
I must have made up the owners manual too then
View attachment 199252

Wow I did not know that! Fantastic piece of evidence.

Apart from two things 1: you have not been reading what has actually been written by myself
And 2: see the note under your fantastic evidence

As I said , you are just being silly , and I can't be bothered. There will be no more response on this silliness from this call-sign.

gold rover · Jan 29, 2020

Back on track @Ruby Range how is Roger?

RangeRoller dt · Jan 30, 2020

Less steering input required at higher speed is all I said. Engine runs pas doesn’t stop the steering wheel turning you div

There is a reason half the RR section have you ingnore - The magnitude of pointless rants like this of yours being the key. Atleast that means most wont see you were wrong, is all you care about

Henry_b · Jan 30, 2020

The manual "no assist" systems lack of assist means that the gear ratio must be lower to allow the you to turn the wheel, the higher ratio of PAS systems in why they weigh a fair bit more when the PAS fails.

,

RangeRoller dt · Jan 30, 2020

She’ll calm down once she had her fill bud. We used to be like this all the time

Nigly · Jan 30, 2020

Believe me steering a Range Rover around a roundabout without power steering is very difficult. It's not like the old
days when cars had no power steering. The wheels are pretty wide and there is the resistance through the failed power steering to consider. It's ok when the wheels are rolling but if you are going slow it's bad.I've had XR2, RS Turbos in my youth and they weren't difficult to steer without power steering.

tomcat59alan · Jan 30, 2020

RangeRoller dt said:
Less steering input required at higher speed is all I said. Engine runs pas doesn’t stop the steering wheel turning you div

There is a reason half the RR section have you ingnore - The magnitude of pointless rants like this of yours being the key. Atleast that means most wont see you were wrong, is all you care about

Am I missing some of this thread? I cannot find any pointless rant,could be that it was posted by someone on my ignore list after another pointless ignorant rant.

RangeRoller dt · Jan 30, 2020

Nigly said:
It's ok when the wheels are rolling but if you are going slow it's bad.

Exactly, thankyou
That all it was.

She knows whatever words come between us I love her really.

kevstar · Jan 30, 2020

RangeRoller dt said:
Love liccle home made bits like that

Here ye go took about 45mins to make got me out of a hole.

RangeRoller dt · Jan 30, 2020

So the bend wasn’t always in it?

Looks Heavy duty
You’ve also snuck a nice hub in there too

kevstar · Jan 30, 2020

RangeRoller dt said:
So the bend wasn’t always in it?

Looks Heavy duty
You’ve also snuck a nice hub in there too

Its a fair weight at very least it bent rather than break the welds.
It started out straight then my mate decided it would work better with a bend in it lol
That's the rebuilt axles of my D1 left them at my ar$e

I will need to move them tomorrow.

RangeRoller dt · Jan 31, 2020

kevstar said:
Its a fair weight at very least it bent rather than break the welds.

Arc?

kevstar · Jan 31, 2020

RangeRoller dt said:
Arc?

Yup crappy old rods that id found lying in the workshop I gave them a once over with a heat gun
but worked a treat. I might spend a bit more time & make a better/neater one.

RangeRoller dt · Jan 31, 2020

You could just paint it. Will look brand new.

tomcat59alan · Jan 31, 2020

kevstar said:
Yup crappy old rods that id found lying in the workshop I gave them a once over with a heat gun
but worked a treat. I might spend a bit more time & make a better/neater one.

Stick them in the oven next Sunday when you do the roast, that will dry them out.

RangeRoller dt · Jan 31, 2020

kevstar · Jan 31, 2020

tomcat59alan said:
Stick them in the oven next Sunday when you do the roast, that will dry them out.

Yes ive done that before

The misses will like that have a few rods in her oven

Before someone askes.….NO yours are not invited lol

L322 Major problem

Well-Known Member

Well-Sprung Member

Well-Sprung Member

Well-Known Member

Well-Known Member

Well-Sprung Member

Think outside, no box required.

Well-Sprung Member

Member

Well-Known Member

Well-Sprung Member

Well-Known Member

Well-Sprung Member

Well-Known Member

Well-Sprung Member

Well-Known Member

Well-Sprung Member

Well-Known Member

Well-Sprung Member

Well-Known Member

Similar threads