good morning. I have a problem with my lt77 suffix G gearbox. For a few months when I put it in reverse if I didn't hold the gear lever with my hand the gear would pop out banging like tok tok. For a couple of days I put it in reverse but the reverse gear won't engage. Do you have any advice before I disassemble and overhaul the entire gearbox. Thanks. A big hello to all lovers of these tractors.
LT77 REVERSE GEAR DOESN'T WORK
- Thread starter Enny
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
tottot
Well-Known Member
- Posts
- 8,028
- Location
- west wales coast
Chances are the reverse idler gear teeth have worn away.
bluedog333
Well-Known Member
- Posts
- 5,442
- Location
- Henley on Thames, Oxfordshire
Before you remove the gearbox, check to make sure the reverse light switch isn’t in too far/broken.
tottot
Well-Known Member
- Posts
- 8,028
- Location
- west wales coast
Another thing to check is that reverse selector is not being jammed from going in all the way by a stone or something.
