Lr322 new key issue

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

jimscotland

New Member
Posts
4
Location
Scotland
Hi all I recently got a lr322 and a new key cut with new internals board/transponder. Now both new and old key turn in door/glovebox lock and do nothing old key works to unlock/lock but has no rubber left on the fob. The new key I have tried to program in through the hol unlock press lock but after 3 days and various attempts I have had no luck also the new key wont turn in ignition? Any help would be appreciated thanks
 
Hi and welcome to the asylum

would assume the new keys will need programming via diagnostics

but the more knowledge members here will be able to help better ref the L322

Ps, what year model etc is it as the more Info u can provide the better
 
So I take it you have done:

upload_2020-1-6_20-20-27.png


If it still doesn't turn in the ignition lock, then you will need to the have the key coded to the EWS system in the car. This assumes that the new key has its little transponder inside it (this is a small, loose plastic looking thing that do tend to fall out when the key is opened.)
 
Hi is Dundee to far as this guy comes highly recommended , name mikey , mention landyzone

MMP Land Rover
Address: 42 Baird Ave, Dundee DD2 3TN
Phone: 07951 187204
 
So I take it you have done:

View attachment 197768

If it still doesn't turn in the ignition lock, then you will need to the have the key coded to the EWS system in the car. This assumes that the new key has its little transponder inside it (this is a small, loose plastic looking thing that do tend to fall out when the key is opened.)

hi buddy

knew u was the wizard with these , I’m sticking to the D3/ L320s , snigger
 
Back
Top