Lpg issues

Michael Mccormack · Oct 10, 2017

Hi guys and gals
Can anyone help a little I had a split hose on my lpg system witch I've replaced but also ran put of gas at the same time and now after changing the hose and sticking half a tank of gas in it won't switch to lpg just switches straight back to petrol

Any ideas?

johnnyb70 · Oct 10, 2017

Obvious question did it work perfectly before the split hose? There's a normally closed solenoid or 2, one on the tank. Check if these are getting power. Plug in the ecu see what's happening. If you don't have the software/cable take it to a specialist they usually will.

Saint.V8 · Oct 10, 2017

What system have you got fitted and which pipe was replaced?

Michael Mccormack · Oct 11, 2017

It's a prins system and it was the pipe that runs from the filler cap to the tank

Orangebean · Oct 11, 2017

As you've been digging around at the tank end, it's probably the tank solenoid not operating. Maybe a connector pulled off or solenoid physically damaged?

Lpg issues

Michael Mccormack

New Member

johnnyb70

Well-Known Member

Saint.V8

Dyed-in-the-wool 100% RR Junkie

Michael Mccormack

New Member

Orangebean

Active Member

Similar threads