long shot i know..efi fuel tank sender resistance?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
zen

zen

Well-Known Member
Events Planner
Posts
2,602
Location
london
neeed to programe up the fuel gauge..does anyone know typical max and min resistance for efi (circa 87-90) fuel tank level sender?

thanks
 
without filling up then emptying it that wont help..

so thanks but does anyone know spec without doing above..
 
zen said:
without filling up then emptying it that wont help..

so thanks but does anyone know spec without doing above..
Click to expand...

Will if you have a spare one to use. Maybe someone has a spare they could measure for you. Don't think spec is published anywhere.
 
afraid i dont have..
and i have seached high and low on internet..nought..plenty for series..which is what i have set it for...but..
 
I have an old sender in an empty tank and it seems to read about 45 ohm with the tank upside down ( i.e. float at the top = full) and 120 ohm with the tank the right way up (float at the bottom = empty).

I hope this helps!

Pete
 
You must log in or register to reply here.

Similar threads

A
Fuel gauge and fuel light issue
Replies
4
Views
316
Acdadefender1
A
R
Fuel gauge reading empty
Replies
9
Views
861
resto_d1
R
Hexonxonx
Dual fuel tanks on military Series IIa - senders and fuel gauge
Replies
1
Views
1K
steve2286w
steve2286w
F
Removing fuel tank.
Replies
9
Views
2K
Caval
C
EmilH
Series 3 upside down fuel sender??
Replies
3
Views
757
EmilH
EmilH
Back
Top