Lift Kit Group Buy
- Thread starter SES88
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
NoDosh
Active Member
- Posts
- 311
- Location
- Hobbit central - Dorset
They're possible, but would be a right pain in the ar$e to make...
The plates that I put in normally are 30mm (added to the 2x 5mm fascia plates makes 40mm), but if we went for say 25mm overall, I'd end up putting 15mm plates in. As it is, I have to weld the front's blind because I can't physically see inside when the torch is in, so would be even worse if the gap to weld in was 15mm, not to mention getting 2 welds in that space and then somehow dressing them off.
In short, its doable, but would be a right pain, more pain than cutting a couple of slots in the inner wing
In that case, I'll take that one Bruthar has dipped out on. I'll drop you a pm
SES88
Well-Known Member
- Posts
- 2,055
- Location
- North East
Can I get a hands up on those who are still after a kit who don't have one... Just looking at numbers to see if I can sort out another batch sooner rather than later...
NoDosh
Active Member
- Posts
- 311
- Location
- Hobbit central - Dorset
Me! Me!
19NMC
Member
- Posts
- 98
- Location
- Preston UK
You can definitely count me in. Everyone else has got one so I want one.
<Arms folded stamping on the floor with one foot> I want one. I want one. I want one.
<Arms folded stamping on the floor with one foot> I want one. I want one. I want one.
SES88
Well-Known Member
- Posts
- 2,055
- Location
- North East
Grand, so thats 5
I'll see how it goes til end of the week then look at ordering new batch of material.
I'll see how it goes til end of the week then look at ordering new batch of material.
GrumpyGel
Well-Known Member
- Posts
- 26,393
- Location
- Christchurch, New Zealand
I want 1 - but need a car to fit it on first! Won't be going on the current one - still trying to find a cheap L Series as me mud plugger!
vilguy
Do'er of stuff and the like
- Posts
- 9,915
- Location
- Dumfrieshire
have we got any pics anywhere of said kit installed? (not just the car being a few mm taller! lol)
want to see it physically fitted!
want to see it physically fitted!
SES88
Well-Known Member
- Posts
- 2,055
- Location
- North East
You mean on the top of the struts?
I've still got bukko's kit sat in the office waiting for him to say he wants it sent... I've also got a couple of struts kicking around somewhere, I can put one front and one rear on the struts if thats any good?!
vilguy
Do'er of stuff and the like
- Posts
- 9,915
- Location
- Dumfrieshire
i was more thinking from inside a wheel arch or something? so we could actually see them fitted
SES88
Well-Known Member
- Posts
- 2,055
- Location
- North East
i was more thinking from inside a wheel arch or something? so we could actually see them fitted
You can't really see them, maybe the bottom edge at most
vilguy
Do'er of stuff and the like
- Posts
- 9,915
- Location
- Dumfrieshire
send us a pic of one fitted to a spare strut then old bean :blabla:
19NMC
Member
- Posts
- 98
- Location
- Preston UK
Here's one!! Only looks about 20mm and maybe not the finest example of engineering, but 'tis one all the same!!
SES88
Well-Known Member
- Posts
- 2,055
- Location
- North East
Here's one!! Only looks about 20mm and maybe not the finest example of engineering, but 'tis one all the same!!
Crikey
19NMC
Member
- Posts
- 98
- Location
- Preston UK
SES88
Well-Known Member
- Posts
- 2,055
- Location
- North East
I thought you'd be impressed !!!
They look like the eBay specials that are about 40 quid and come unpainted without any fixings! I'll pop on some pics later once I've found my struts
SES88
Well-Known Member
- Posts
- 2,055
- Location
- North East
Better slightly late than never, here's a couple of pics for comparison...
19NMC
Member
- Posts
- 98
- Location
- Preston UK
Wish that bloke who makes them would pull his finger out...........................
SES88
Well-Known Member
- Posts
- 2,055
- Location
- North East
Wish that bloke who makes them would pull his finger out...........................
Haha, I'll tell him ya asked
