DandyOnline
New Member
- Posts
- 9
- Location
- Aberystwyth
Just bought a Freelander 1 TD4 HSE, it is the facelift version and apart from having the center prop removed there seem to be very few issues with it. Certainly no serious ones at least
Exactly! Possible transfer case or rear diff problems?Mmmm but why was the centre prop removed?
Fool economy?You won't get more gently broken in with plenty of 4play than a Freelander
Centre prop removed for fool economy innit
I see, isn't that a myth? Surely disconnecting the rear driving wheels can't improve fuel economy that much?Better fool economy, the less often your wallet gets raped
I don't think it would save much either. Well hopefully I can just chuck in a new shaft and all will be well...Unless you have free wheeling hubs like the series land rovers can have, I personally don't really think it will save you much.
What's the VCU?Welcome to the forum
Tis er myth about disconnecting the drive ter rear wheels on a FL1 ter reduce fool consumption. It makes so little difference yer can't measure it. It could only be measured accurately in controlled lab conditions. Air temperature, humidity, altitude, sitting at the lights on tickover, rate of eggcelleration and the number of times and duration are all unmeasurable factors int daily drivin.
It was likely removed because of a problem like VCU needing replaced, transmission problems or owner scared and removed it before something eggspensive needed repaired.
Viscous coupling unit. It sits between the front and rear prop shafts on a Freelander 1.What's the VCU?
Yes and no and sometimes.Int there MOT and insurance issues with having the prop removed @Hippo
Welcome To LandyZone, the Land Rover Forums!
Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.
Registering is free and easy just click here, we hope to see you on the forums soon!