Land Rover electronics assistance required

Hi guys,

I'm new to the forum. I was told this is the best place to get to the bottom of my problem.

I have a '97 4.6 P38 which has had an engine conversion using a 2.8 Mitsubishi turbo diesel lump. The issue I'm having is the car wont recognize that the engine is running. The BECM appears to be active, as after refitting the battery I can program the key using the door code. I don't appear to have an RPM signal to any of the necessary components i.e tachometer, EAS and gearbox.

Any advice would be greatly appreciated. :frusty:

Does any one know what needs to be connected to the ecm crank sensor , maf , coils lamber etc etc etc

Does any one have pin data for the ecm becm and the gearbox ecu

try the rr section..im sure one of there butlers will have the answer