Land Rover 90 Soft Top Build

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Gottschalk said:
Where did you source rear tailgate and hooks for the tub if you don't mind me asking?
Click to expand...

Tub fixings , I got from allwheel trim, Tailgate, as I wanted to hange the spare tyre off of it, I made as solid framework that does not open.

But a lot of peeps use the full door and cut it down or use an 2nd hand tailgate.

Cheers
 
Gottschalk said:
Think I will go for side opening tailgate for kids jumping in and out! :)
Click to expand...

Also do not forget the roll bar. Again allwheel trim do one based on the military one, but it does require you have the bulkhead in place to fix it to. Which unfortunately mine does not.

There is a rear door on the bay for £60 atm,

Cheers
 
Look at Foxyred s rebuild he did a 90 pickup but on rear he used a full door cut down made a really nice job, saves getting the towbar dent on a downward tailgate and you can mount a wheel there still
He also used a raptor paint on the tub floor which looked very durable depending what you gana be using for
 
alexc2701 said:
you can mount a wheel there still
Click to expand...

Knowing how the standard door can flex with a spare wheel on it, I would think the durability of fitting a spare wheel to a modified side opening door which only uses 2 hinges would be questionable, Better to fit a spare wheel carrier if you are doing that.

Cheers
 
neilly said:
Knowing how the standard door can flex with a spare wheel on it, I would think the durability of fitting a spare wheel to a modified side opening door which only uses 2 hinges would be questionable, Better to fit a spare wheel carrier if you are doing that.

Cheers
Click to expand...
Seen one where they added some strengthening ribs plus you could use a swing out wheel carrier still, it'd be more user friendly than a tailgate with a wheel in back in my humble opinion wonder how a swing out would fit on a tailgate be bit of a faff though
 
alexc2701 said:
tailgate with a wheel in back
Click to expand...

True, any door would require the strengthening plates / ribs inside it if fitting the spare wheel to it. But then It is the hinges that will fail.
Spare wheel inside the tub just takes up too much space , which is at a premium in the 90 anyway. Which is why mine is bolted on the back.

Here are a few examples. Just make sure it can be operated / opened from the inside. Which is a laugh if the rear canvas flap is tied down.
da2259_situ.jpg
rwc3L.jpg


Cheers
 
neilly said:
True, any door would require the strengthening plates / ribs inside it if fitting the spare wheel to it. But then It is the hinges that will fail.
Spare wheel inside the tub just takes up too much space , which is at a premium in the 90 anyway. Which is why mine is bolted on the back.

Here are a few examples. Just make sure it can be operated / opened from the inside. Which is a laugh if the rear canvas flap is tied down.
View attachment 125055 View attachment 125056

Cheers
Click to expand...
I need to get a swing out for mine they're rip off though. If you buy like 10 ex md brand new on auction like 300 quid. Then people charge 200 for 1 on fleabay. Faff if you buy a set though and collection
 
Really, they sell landrovers..............???...:p:p

OK, I have never seen swing away carriers on the withams site.

Which is why I was hoping you had a link for them.

Cheers
 
They do loads I was amazed when did a general search at variety. There's diff auctions the online one normal best bits other is like a catalog and nm others just price right rip offs. The red one forget name normal online one loads of ones not used or crashed not the good goo nick ones the trucks always have way too high reserves to be honest. But can find bargains on parts. Full recon boxes for few hundred pallet engines mixed part boxes then wheel sets tarp sets for soft top conversions wheels etc. There's alot of people who buy there for a living but sometimes get lucky
 
They do loads I was amazed when did a general search at variety. There's diff auctions the online one normal best bits other is like a catalog and nm others just price right rip offs. The red one forget name normal online one loads of ones not used or crashed not the good goo nick ones the trucks always have way too high reserves to be honest. But can find bargains on parts. Full recon boxes for few hundred pallet engines mixed part boxes then wheel sets tarp sets for soft top conversions wheels etc. There's alot of people who buy there for a living but sometimes get lucky
 
Here is my tailgate & spare-wheel carrier set-up, been in use for over 15-years now and never given a moments problem.
I had the carrier & tailgate inner galvanised a few years ago and I replaced the standard hinges with Optimill ones (to match the front doors) but it all works well.







 
Litch said:
Here is my tailgate & spare-wheel carrier set-up, been in use for over 15-years now and never given a moments problem.
I had the carrier & tailgate inner galvanised a few years ago and I replaced the standard hinges with Optimill ones (to match the front doors) but it all works well.







Click to expand...
i do like what you have done with your tub there, nice storage.
Also i have all the bits to auto my 200tdi but havent done it as not sure what it would be like (have bad legs so am holding off as long as possible before i auto it)
 
You must log in or register to reply here.

Similar threads

P
D90 Hard to soft top conversion questions
Replies
10
Views
853
Peio
P
MacStu
Wolf style rim retrofit to 1983 110
2 3
Replies
50
Views
1K
miktdish
miktdish
jimllshiftit
Any advice for novice welder about to stitch new rear cross member to 90 chassis?
Replies
3
Views
788
tottot
tottot
B
bulkhead
Replies
7
Views
549
Dauphproto
D
D
Land Rover 90 insurance
Replies
7
Views
680
KISSMYAURA
KISSMYAURA
Back
Top