mathewpink
New Member
- Posts
- 141
- Location
- stockton on tees
hi every one i am new on here. I am looking at putting a L series engine in to a 2A. i am looking to use the 2A gearbox if i can. Has any one every done this or can any one help.
L series engine
- Thread starter mathewpink
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
maxcribbin
Banned
- Posts
- 82
- Location
- West Yorkshire
Whats an L series?
mathewpink
New Member
- Posts
- 141
- Location
- stockton on tees
they are the ones that are put in the rover 200,400,600 and the earlyfreelanders
ChrisV8
New Member
- Posts
- 68
- Location
- Sedbergh Cumbria
That's an interesting idea, I have a Montego in mine which is pretty good, you would need the ECU etc to make it all work might be worth talking to Interspin abut adaptors etc.
mathewpink
New Member
- Posts
- 141
- Location
- stockton on tees
i have all the ecu and every thing. i work on rover cars so have most the stuff i need around me. do u have any contact details about the company.
bonnybaggot
Active Member
- Posts
- 404
- Location
- N. Ireland
Suggest you go for a Montego Turbo diesel a well proven transplant. Otherwise your main problems will be making engine mountings making a bellhousing from block to starter getting clutch and pressure plate to work also will series gearbox spigot end fit into your flywheel. In the 1970s I put a 2.2 bmc diesel into a swb series 2 worked well but was quite difficult to do. Since then have done quite a few different transplants. Be patient take your time "measure twice cut once" and you should suceed. good luck BB
