- Posts
- 83,296
- Location
- Embasinga stocæ
If its like mine, you need to remove the heat shield and get a couple of extension bars to bring the ratchet forward of the exhaust.
Jump start !!!!
- Thread starter MikeDISCO
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 760
- Location
- Staffordshire
tried and tried today to get it off as my mate is going to have a look at it for me tomorrow but i can get the rear 13mm bolt out!!!
I hav half rounded the corners now and the 13mm socket is just slipping. tired 12 mm and 1/2" but no joy.... any ideas?
Try and knock it round with something and a trusty hammer?....
I hav half rounded the corners now and the 13mm socket is just slipping. tired 12 mm and 1/2" but no joy.... any ideas?
Try and knock it round with something and a trusty hammer?....
- Posts
- 760
- Location
- Staffordshire
any one offer any advice?..... plz....
landrovermilfer
Active Member
- Posts
- 469
- Location
- mid wales
have you got any six sided sockets mike , as they tend not to slip like the 12 point ones do , try and hammer on a six side socket if ya can get hands on one.... good luck
- Posts
- 760
- Location
- Staffordshire
good idea, got a set of 6 sided sockets at work, will give it a go tomorrow, thanks
Richard Martin
Well-Known Member
- Posts
- 1,371
- Location
- Cardiff
These are good Irwin 5 Piece Bolt Grip Set - expansion set - Machine Mart
- Posts
- 760
- Location
- Staffordshire
ohhh i like the look of them, cheers richard
