Jerry Can Mounts

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
LandyMan

LandyMan

Well-Known Member
Posts
1,184
Location
somewhere in the UK
Hi People,

I hope you all had a good Christmas and New Year :)

I am thinking about putting some mounts for Jerry Cans on my Freelander, but I don't know where to mount them.

Has anyone done this before?

Thanks
 
i thought about getting a mount for my Jerry can. Was gonna roofrack mount it. But it's only every been a passing idea!
 
I just fitted GG at2 in a 225/70/15. Wish I would of went to a 235/75/15 which would of fit perfectly in my 15x6 rim. No lift or spacers on mine.
 
either roofrack, or strap onto the spare wheel, like some bike carriers do (albeit, this can be expanded out as an idea, to use a steel frame/etc)

Failing that... put it in the boot :lol:



EDIT: another idea, would be to make a frame to hold a jerry can, then mount the rear number plate to it, and an additional numberplate light (remove the bulb from the original)
 
Last edited:
Here's some inspiration from various UK outlets.

Simple option seems to be to tie them on the roof rack as already suggested.

Maybe weld something onto a custom mount on the back also?

See the Defender? I like the idea of a 'custom' window frame for the FL (they aren't made). To do this we'd have to get a large group buy to make it cost effective and someone to kindly manufacture them for us to fit the shape of the Freelander! Also you'd need to take your side panel trim out to fit to drill the bodywork. Bettter Pic of Defender window grill linked: http://www.extreme4x4.co.uk/acatalog/ssteelgrills5L.jpg
 

Attachments

  • Devon_4x4_ARB_Double_Jerry_Roof_Rack_Part_No_ARB3500390.jpg
    Devon_4x4_ARB_Double_Jerry_Roof_Rack_Part_No_ARB3500390.jpg
    19.3 KB · Views: 223
  • Maverick_4x4_Defender_Side_Mount_Part_No_JCBR001.jpg
    Maverick_4x4_Defender_Side_Mount_Part_No_JCBR001.jpg
    30.4 KB · Views: 2,149
  • ARB_Jerry_Can_Part_No_Part Number ARB5711222.jpg
    ARB_Jerry_Can_Part_No_Part Number ARB5711222.jpg
    25.2 KB · Views: 293
  • Devon_4X4_Rhino_Rack_Jerry_Can_Mount_Part_No_RRRJCH.jpg
    Devon_4X4_Rhino_Rack_Jerry_Can_Mount_Part_No_RRRJCH.jpg
    23.1 KB · Views: 223
  • Island_4x4_Part_No_Jerry Can Holder DA2182.jpg
    Island_4x4_Part_No_Jerry Can Holder DA2182.jpg
    13.5 KB · Views: 214
Last edited:
To be honest about this first of all is there not fuel stations on this drive also I would never mount a Jerry can on the back just in case someone ran into the back then you may loose the car also insurance may not pay up.
 
I know they have mounts front and rear but usually these are for things like crossing deserts not on ordinary road runs and you can still probably still get the cans and fittings from anchor supplies
 
you can get a tray for the towbar bolts on between the hitch and taw bar, usually used for carrying mobility scooters my dads got one folds up when not in use ( can be removed for day to day running via some pins) similar to this
mPE6SkCCuEJ_hdrXcZrbTbQ.jpg


there's quite a few on the market of differing sizes.

or you could always try the wide side steps and attach somehow ..
 
Thanks for all the help here guys, I'm going to be driving through a lot of mountains ranges, I do not know if there are any fuel stations on route, so just wanted to take some fuel in cans as backup.

Can't put them on a roof rack as I haven't got 1, but I do have a roof box.

I like the side window mounts, but I don't think you're allowed to have fuel cans stored on any side, front or back on a car in the UK? correct me if i'm wrong though
 
TD4_4x4 said:
Here's some inspiration from various UK outlets.

Simple option seems to be to tie them on the roof rack as already suggested.

Maybe weld something onto a custom mount on the back also?

See the Defender? I like the idea of a 'custom' window frame for the FL (they aren't made). To do this we'd have to get a large group buy to make it cost effective and someone to kindly manufacture them for us to fit the shape of the Freelander! Also you'd need to take your side panel trim out to fit to drill the bodywork. Bettter Pic of Defender window grill linked: http://www.extreme4x4.co.uk/acatalog/ssteelgrills5L.jpg
Click to expand...

I have the one holding the yellow cans.. Its useless (HANNIBAL) I find the bolts which hold it together chafe the cans. to the point where they are thinning.

72775d1435109747-jerry-can-mounts-devon_4x4_arb_double_jerry_roof_rack_part_no_arb3500390.jpg
 
You must log in or register to reply here.

Similar threads

S
2WD conversion
Replies
12
Views
752
Alibro
Alibro
M
Freelander 1
Replies
4
Views
651
GrumpyGel
GrumpyGel
D90 Td5
Defender Td5 Gearbox Mounts
Replies
3
Views
887
dag019
dag019
R
DAB to DAB+
Replies
1
Views
273
Nodge68
Nodge68
J
Freelander 2 SD4 M/S
Replies
2
Views
317
Nodge68
Nodge68
Back
Top