Remington rolling block
Active Member
- Posts
- 89
- Location
- Birmingham
Hello Rob, A blast from my steam cleaner works well too, As you say and old rug and "let it flow"
Its happening again
- Thread starter Remington rolling block
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
zeaphod
Well-Known Member
- Posts
- 3,107
- Location
- Belfast, Norn Iron
As before, get the right oil into it, sort out the idle speed and change the oil pressure switch. I'll put 50p on those things sorting you out - no point in looking for trouble!
Colthebrummie
Well-Known Member
- Posts
- 9,870
- Location
- Thatcham
Or, it could be a short somewhere in the wiring.
Col
Col
Remington rolling block
Active Member
- Posts
- 89
- Location
- Birmingham
Fingers crossed your right Zeaphod. still waiting for my gauge to arrive
Hello Col,,, what bit of Brum you from, Castle Brom here
Hello Col,,, what bit of Brum you from, Castle Brom here
Colthebrummie
Well-Known Member
- Posts
- 9,870
- Location
- Thatcham
Hello RRB. I'm from south Brum, Kings Norton, Stirchley, Northfield. But I moved to Bromsgrove when I was 30 and then to Thatcham 17 years ago for work. I still get back to Brum regularly because my family are still there. I can't believe how they have transformed the town centre.Fingers crossed your right Zeaphod. still waiting for my gauge to arrive
Hello Col,,, what bit of Brum you from, Castle Brom here
Col
Hicap phill
Well-Known Member
- Posts
- 16,243
- Location
- Wiltshire
@Colthebrummie best not go back near home all the pubs have gone.
Drove through long bridge oh it's changed & nearly all gone.
Drove through long bridge oh it's changed & nearly all gone.
Remington rolling block
Active Member
- Posts
- 89
- Location
- Birmingham
Yeh that's true enough, brum don't belong to the natives anymore. Yep when British Leyland went it took the heart out of brum and the smoking ban killed the pubs, and the city centre,,,,,,,,,,,,,,,,,,,,,,,, haven't been there in 20 years,,,,,,,,,,,, think im getting old and grumpy lol.
Tom
Tom
Hicap phill
Well-Known Member
- Posts
- 16,243
- Location
- Wiltshire
Good times was in Dunlop putting in the extruders and tyre lines. Used to drive in on a Friday in the race mini & new set of "dunplops" from the rally section. Closest thing to slicks.
Security would not say anything as they were not correctly named.
City centre is only good if I go the German market rest of the time avoid...
Security would not say anything as they were not correctly named.
City centre is only good if I go the German market rest of the time avoid...
Remington rolling block
Active Member
- Posts
- 89
- Location
- Birmingham
Oh Phill now you are going back,,,,,,,,,,,, Gawd racing mini's best of the bunch was the 970S real screamer, I played with the 1275 but that big slab of iron on top of the block wasn't a good idea,,,,,,,,,,,, lol I think I still have an Allard 8 port laying around somewhere,,,,, oh happy days
Hicap phill
Well-Known Member
- Posts
- 16,243
- Location
- Wiltshire
Racing from brum to Wales on bank holidays in the minis. Every time you get a new car it had to be done. Last year friend picked me up for the "test drive" except it's a left hooker & kept putting me out to see what was coming. He drove up from Portsmouth & then through back roads. Runs sweet & turbo howls
Remington rolling block
Active Member
- Posts
- 89
- Location
- Birmingham
Very nice,,, now if I can just work out how post pictures
Hicap phill
Well-Known Member
- Posts
- 16,243
- Location
- Wiltshire
I use phone so unsure if it's the same. Lower right , up load a file, click this to add photo, then full size.
Youtube clips use the film icon and add address
Youtube clips use the film icon and add address
Remington rolling block
Active Member
- Posts
- 89
- Location
- Birmingham
Think I need my G/daughter my phone has a dial and is a coal burner and a nice lady that tells me the time.Back to the plot,,, today I should have my gauge/switch and a few other bits and bobs so need to got on an oil hunt later. don't think I should use the chip fat and WD40 this time
Colthebrummie
Well-Known Member
- Posts
- 9,870
- Location
- Thatcham
I guess the younger generation would say the changes to Longbridge are a good thing, lots of new apartments and a flashy retail village, without a thought of the thousands who lost their jobs when the car pant shut down, not to mention the death of a Birmingham heritage. It's very sad to see from my perspective but progress is progress and without it we would still be living in caves and mud huts.
Col
Remington rolling block
Active Member
- Posts
- 89
- Location
- Birmingham
Give me a mud hut
Ok Gentlemen the story to date My oil pressure gauge arrived this morning and was duly fitted ( looks good in the dash but I haven't a clue what time it is now )
Set up from cold gave 52psi
running cold ,,,,,,,,,,,,,, 45psi
tickover at cold 40psi
Temp up to normal running 45 psi
70mph ,,,,,,,,,,,,,,,,,,,,,,,,,,,,, 45/46 psi
Tickover ,,,,,,,,,,,,,,,,,,,,,,,,,,,28psi
wrung its neck down the motorway for 30 miles
Running ,,,,,,,,,,,,,,,,,,,,,,,,,,45psi
Tickover ,,,,,,,,,,,,,,,,,,,,,,,28/30psi
Heater off or on no difference I could see, ok not great pressures but I don't think she will die in the near future
Worst tickover pressure I got was a steady 25psi after leaving it to idle for about 15 mins. Still have the oil change to do, but I think it was all down to a shot pressure switch and a shovel of panic thrown in for good measure.
Thank you all for your help and support.
Tom
Ok Gentlemen the story to date My oil pressure gauge arrived this morning and was duly fitted ( looks good in the dash but I haven't a clue what time it is now )
Set up from cold gave 52psi
running cold ,,,,,,,,,,,,,, 45psi
tickover at cold 40psi
Temp up to normal running 45 psi
70mph ,,,,,,,,,,,,,,,,,,,,,,,,,,,,, 45/46 psi
Tickover ,,,,,,,,,,,,,,,,,,,,,,,,,,,28psi
wrung its neck down the motorway for 30 miles
Running ,,,,,,,,,,,,,,,,,,,,,,,,,,45psi
Tickover ,,,,,,,,,,,,,,,,,,,,,,,28/30psi
Heater off or on no difference I could see, ok not great pressures but I don't think she will die in the near future
Worst tickover pressure I got was a steady 25psi after leaving it to idle for about 15 mins. Still have the oil change to do, but I think it was all down to a shot pressure switch and a shovel of panic thrown in for good measure.
Thank you all for your help and support.
Tom
Remington rolling block
Active Member
- Posts
- 89
- Location
- Birmingham
A few names to fire up the memory Col.............. Sloopys, The Rum Runner The Elbow Room, Kenny Burns, Trevor "nice boy" Francis, Andy Grey , Don and Eddy Futral, Samantha's, Rebecca's , Hole in the Wall, Boggarts,,,,,,,,,,,,,,,,,,, brings tears to ya eyes mate. Almost forgot The White Tower grab a grannie nights ROFL, as Mary Hopkins said " Those were the days my friend"
Colthebrummie
Well-Known Member
- Posts
- 9,870
- Location
- Thatcham
I don't remember Sloopys but the others I have fond memories of, except Trevor Francis when He buggered off to Notts Forrest. I frequented the Futral's clubs a few times and got thrown out of Rebecca's more than once. The Futral's were Brums answer to the Kray twins.
Glad your oil pressure issue is sorted, it is a bit low but acceptable I think.
Col
Glad your oil pressure issue is sorted, it is a bit low but acceptable I think.
Col
Remington rolling block
Active Member
- Posts
- 89
- Location
- Birmingham
Up date.... Ive now changed the oil, cooler thermostat, shortened the gauge capillary and bled it.... now getting 35psi tickover hot and a tad under 60psi running hot with or without the heater.
Next job rockers and shaft
Next job rockers and shaft
zeaphod
Well-Known Member
- Posts
- 3,107
- Location
- Belfast, Norn Iron
Result! - great job
dstainton
Well-Known Member
- Posts
- 301
- Location
- Fort Saint James Canada
Dear, Falling Block, what caliber? I've a Sharps 45-120.
