Is my VIN Number correct?

Saint.V8 said:

with oil pressure running around 3 bar (45 psi) or thereabouts (not sure what it is on the 300Tdi - but not far off I'd think), if the seals were letting by, it would spray out at quite a rate....especially with a rotating shaft and impeller sucking it through too.....

Clean the hoses, fire her up and if they get a mist of oil straight off the bat, the seals are leaking.....hence why he says you need to rig up a 'catcher' to see how much is being spat out the turbo outlet into the induction pipes.

Click to expand...

jamesmartin said:

anr3598 and anr2135, run it with breather hose disconnected and placed in a container

Click to expand...

Kwakerman said:

Mine is a 300TDI 90 CSW and the vin starts SALLDVB67TA99****, first registered Aug 96

Click to expand...

Rougharse Racing said:

Manufacturers change to the following year in September, hence a September 1996 build would be a 1997 model year.

Click to expand...

raisingveg said:

space ends exactly where my wife tells me it does

Click to expand...