Freelander 1 Interior LED lights from fleabay

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
LandyMan

LandyMan

Well-Known Member
Posts
1,184
Location
somewhere in the UK
Bought a set of interior LED lights off ebay for a couple of quid.

CLEARLY stated they were for a freelander 1.

Swapped them this morning, they're about 2mm too long.

The front 2 fitted in ok, at a squeeze.

The rear 1 didn't and I accidentially snapped 1 of the things off the plastic that hold the bulb.

DOH!!

Anyway, they seem ok and very white. Will take a pic tonight so you can all see my bright interior LEDs :)

p.s. I had already fitted 2 huge LED clusters in the boot that brightens up the whole street lol.
 
The rear bulb is a 31mm festoon bulb. The front is a 34mm festoon bulbs.
There are several ebay sellers doing bulbs that would work and fit fine. The brightest types generally of the COB verity.
I can’t link ebay for some reason though :(
 
Way to long then. You can get COB LEDs in 31mm and 34, or is it 36mm? COBs are the way forward though ;)
 
LandyMan said:
whats a COB?
Click to expand...

COB = Chip On Board.
Like this.
Screenshot_2016-02-09-10-13-11.png
 
these are the 1's I bought

http://www.ebay.co.uk/itm/291061864975?_trksid=p2060353.m2749.l2649&ssPageName=STRK:MEBIDX:IT

I emailed the seller several days ago but not heard anything from them!

NoDosh said:
I wired in a couple of COB DRLs on the C pillars of my 3 door and its bright enough to use as an operating theatre. At under a fiver for the pair it was rude not to!

http://www.ebay.co.uk/itm/161321822717
Click to expand...

Where did you wire them into?

Rimini-Scott said:
Has anybody put a led bulb in the rear boot light, what bulb is it ?
Click to expand...

I took the bulb out and wired in 2 huge LED clusters that are stuck on the inside, higher up to the left and right of the back door (about head height).
 
I wired them in to the boot light (offside rear panel). Ran the cable under the trim and up the pillar on the offside, under the carpet and behind the trim on the nearside. The current draw is tiny, so no issue running the cabling. Note that you have to run earth and live to both, you can't pick up a local earth point as it appears the earth is switched.
 
NoDosh said:
I wired them in to the boot light (offside rear panel). Ran the cable under the trim and up the pillar on the offside, under the carpet and behind the trim on the nearside. The current draw is tiny, so no issue running the cabling. Note that you have to run earth and live to both, you can't pick up a local earth point as it appears the earth is switched.
Click to expand...

cool, thanks for that, i've just ordered some :)
 
You must log in or register to reply here.

Similar threads

R
LED side lights not working
Replies
9
Views
725
RickyFreelander
R
DEMABS
Interior lighting upgrade.
Replies
1
Views
785
Nodge68
Nodge68
LukeyT
Disco 2 Disco 2 Electrical Issue Interior Lights, Radio, Heater Controls and Immobiliser
Replies
6
Views
899
LukeyT
LukeyT
S
1988 90 replacing lights with LEDs and have lots of questions
Replies
5
Views
853
sleepybear
S
K
What money should I be asking?
2
Replies
27
Views
4K
Karls
K
Back
Top