P38A insomnia

kermit_rr · Nov 15, 2020

I do recall some discussion about that, but i think it was a question, my eas levels with the door open, even though it shouldn't, yet the dash says the key is in the ignition when i open the door.
Still not got to the bottom of that one

RangeRoller dt · Nov 15, 2020

Thats got to be resolved. Fiddly job but definitely worth it. Mine was gunked up originally with what I presume was dust/wd40. Cleaned out what I could and I scribble on my key with a pencil now and again (is graphine not lead)

kermit_rr · Nov 15, 2020

What needs to be resolved though? It must be a connection somewhere, but no clue where. Somewhere between becm and eas i expect

brianp38dse · Nov 15, 2020

Key in ignition when the door is opened is the gate in the ignition barrel not closing, spray in barrel with contact cleaner, use the key and give it a good in and out and on an off a few times, blow out with air line if available or just let dry then a little bit of graphite lock powder and jobs a goodun simples

kermit_rr · Nov 15, 2020

brianp38dse said:
Key in ignition when the door is opened is the gate in the ignition barrel not closing, spray in barrel with contact cleaner, use the key and give it a good in and out and on an off a few times, blow out with air line if available or just let dry then a little bit of graphite lock powder and jobs a goodun simples

Sorry, my point was, when the key is in, the dash registers the door opening and closing

meaning the door switches are working properly

RangeRoller dt · Nov 15, 2020

It should say key is in when you open the door, when you have the key in

kermit_rr · Nov 15, 2020

RangeRoller dt said:
It should say key is in when you open the door, when you have the key in

It does

and doesn't when the door is closed

RangeRoller dt · Nov 15, 2020

I’m beginning to think your right. Have no reason to believe your p38 is faulty your just mad

brianp38dse · Nov 15, 2020

kermit_rr said:
Sorry, my point was, when the key is in, the dash registers the door opening and closing meaning the door switches are working properly

Ah i see, i was reading it wrong

RangeRoller dt · Nov 15, 2020

+1 ah

kermit_rr · Nov 15, 2020

I don't dispute the madness, after all, i can't even get my avatar pic right!!

RangeRoller dt · Nov 15, 2020

If you change it people won’t know who you are and start treating you like a newb lol. Mine is progressive was tatty to start with

kermit_rr · Nov 15, 2020

RangeRoller dt said:
If you change it people won’t know who you are and start treating you like a newb lol. Mine is progressive was tatty to start with

The Kermit/womble selection was by choice, just not figured out the reason yet

P38A insomnia

kermit_rr

Very

RangeRoller dt

Well-Sprung Member

kermit_rr

Very

brianp38dse

Well-Known Member

kermit_rr

Very

RangeRoller dt

Well-Sprung Member

kermit_rr

Very

RangeRoller dt

Well-Sprung Member

brianp38dse

Well-Known Member

RangeRoller dt

Well-Sprung Member

kermit_rr

Very

RangeRoller dt

Well-Sprung Member

kermit_rr

Very

Similar threads