Inlet manifold gasket

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
F

ftoed

New Member
Posts
17
Hi All

I'm wanting to change the inlet manifold gasket on the wifes 1.8 FL.
I should be able to do it as usually do my own diy on my own jap cars but as i've not had any experience with the k-series..here comes the silly question, where is it!?.

Thanks for any help!

ED
 
ftoed said:
Hi All

I'm wanting to change the inlet manifold gasket on the wifes 1.8 FL.
I should be able to do it as usually do my own diy on my own jap cars but as i've not had any experience with the k-series..here comes the silly question, where is it!?.

Thanks for any help!

ED
Click to expand...
Between the inlet manifold and the cylinder head.
 
thanks for all the replies. I also want to see if i have an airlock in the system, the valve on the pipe that goes into the matrix just doesn't want to loosen, anyone know if its best to use a flat head on it or a wrench around it to open it? Don't want to use too much force as its plastic on a rubber pipe!
 
You must log in or register to reply here.

Similar threads

xDParis64
Head Gasket / Cylinder Gone??
Replies
16
Views
1K
andyfreelandy
andyfreelandy
C
Freelander 1 New Radiator
Replies
0
Views
502
Chris_68
C
G
Brake servo on a 2A Diesel ?
Replies
11
Views
718
grewth
G
E
Freelander 1 Fitting new crankshaft rear oil seal and oil sump gasket to L series
Replies
1
Views
505
GrumpyGel
GrumpyGel
S
Disco 4 (LR4) Left hand inlet manifold replacement
Replies
10
Views
4K
Stevie135
S
Back
Top