indicator fault again

Jon4468 · Jun 4, 2015

hi
looking for some help with my 110 indicators please. I have been through loads of other posts on the subject but none match my problem.
I have replaced the relay and hazard switch not made any difference. symptoms are that I indicate either way then the relay clicks once and dash board trailer light lights up and stays on solid until I cancel the indicators. same also happens when I press the hazard switch on.
any help would be great thanks, jon

stuthegeordie · Jun 4, 2015

I had the same problem. Mine would clear if I pressed the hazzard switch,( even though it was off) and cancel the indicators. Put indicators back on and theyd work.

Jon4468 · Jun 4, 2015

I get nothing at all, getting really bored of it now.

stuthegeordie · Jun 4, 2015

Nowt worse than gremlins in the electrics.

I had a load of electrical problems and they all started when I went into the fusebox. Seem the fuses/ holders were so old they had some kind of corrosion on them that meant when I put them back in they weren't making a conncetion. New fuses and some emery cloth solved my problems. Just a thought.

Jason2 · Jun 5, 2015

stuthegeordie said:
I had the same problem. Mine would clear if I pressed the hazzard switch,( even though it was off) and cancel the indicators. Put indicators back on and theyd work.

Same here ! And then would'nt work at all . I ended up taking the hazzzzzzard switch out cleaning all the conections on the back that had oxidised, squirt of WD40 or two and it's been fine ever since

zeaphod · Jun 5, 2015

Sounds like a mysterious earth fault. It's trying to earth itself through the trailer wiring. Clean fuse connections, remake earth connection behind dash.

indicator fault again

Jon4468

New Member

stuthegeordie

Member

Jon4468

New Member

stuthegeordie

Member

Jason2

Well-Known Member

zeaphod

Well-Known Member

Similar threads