Impact Sockets?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
T

timmotchell

Member
Posts
10
Afternoon all, I've got some very rusted wheel nuts to tackle on a 91 reg Defender, followed by an attempt on a (rusted) re-chassis... I've got a high torque impact driver, and am looking to buy some impact sockets, but am wondering if I need to buy a "whole set", or whether I can pick and choose / there are only 4 or 5 that I'll need.....?

Also, I'm wondering if there's a certain brand that people recommend, or are the all pretty much of a muchness?

Any advice appreciated.
Thanks.
 
You 'need' a whole set ...

www.ebay.co.uk

US PRO DEEP & SHALLOW IMPACT SOCKET Set 1/2"Dr 35pc 8mm-32mm 6pt Hex Sockets Set | eBay

8MM - 9MM - 10MM - 11MM - 12MM - 13MM - 14MM - 15MM - 16MM - 17MM - 18MM - 19MM - 20MM - 21MM - 22MM - 23MM - 24MM - 27MM - 30MM - 32MM. DEEP & SHALLOW IMPACT SOCKET SET. 10MM - 12MM - 13MM - 14MM - 15MM - 16MM - 17MM - 18MM - 19MM - 21MM - 22MM - 24MM - 27MM - 30MM - 32MM.
www.ebay.co.uk

and an extra 10mm, cos thats the one that always dissapears
 
I’ve got a set of the US Pro off of Amazon and they are fine. If you can’t afford the full deep/shallow set, get a set of deep ones on their own. It means you need a bit more room, but I find I use them more than the shallow ones.
 
Cheap ****ers will do just fine for home use, all my home tools are the cheapest of the cheap, not broke anything yet.

These are good!

www.ebay.co.uk

US PRO IMPACT Socket Set 1"Inch DRIVE 70mm - 100mm HGV Long Reach Impact Sockets | eBay

US PRO 6PCS 1" DRIVE 6 POINT JUMBO IMPACT SOCKET SET ( 70MM - 100MM ). SOCKET SIZES ( MM ) : 70MM - 80MM - 85MM - 90MM - 95MM - 100MM. 70MM SOCKET LENGTH ( MM ) : 95MM LONG. 80MM SOCKET LENGTH ( MM ) : 100MM LONG.
www.ebay.co.uk
 
Yes, I've been pleasantly surprised with US Pro as a budget brand. I have some of their 1/2" sockets as well as larger 3/4" and 1" drive ones for my digger and dumper and I haven't broken any yet.

People on here seem to have good experience with the current generation of Halfords stuff. I'm still a little apprehensive about them because socket sets I bought from them in the 1980s were a little too soft, and the points would come off the insides of the sockets if we used them on anything that had been done up to a high torque, like cylinder head nuts. Maybe they're better nowadays.
 
I bought a set for the back of the landy last week we have a tool & materials van that comes in every friday,
Does welding,grinding drill bits ect. The are a sealey dealer so we take stuff & pay for it the following week.
I dont recall the cost of the sockets but my total bill was 191 sovs, a pack of solder wire connectors & gas heating torch for them.

https://www.sealey.co.uk/product/5638018348/34pc-12sq-drive-impact-socket-set
 
Of course what we all really want is a set of these ...

Pardon our interruption...

www.ebay.co.uk
These

Pardon our interruption...

www.ebay.co.uk

and these ...

Pardon our interruption...

www.ebay.co.uk

So when a mate says "have you got a 16mm socket" you can say (nonchalantly), "yeah, somewhere, i've got 3/8, 1/2 or 1/4", have a look in the third drawer on the tool chest".

Of course then you need ratchet wrenches and extension bars.
 
miktdish said:
Of course what we all really want is a set of these ...

Pardon our interruption...

www.ebay.co.uk
These

Pardon our interruption...

www.ebay.co.uk

and these ...

Pardon our interruption...

www.ebay.co.uk

So when a mate says "have you got a 16mm socket" you can say (nonchalantly), "yeah, somewhere, i've got 3/8, 1/2 or 1/4", have a look in the third drawer on the tool chest".

Of course then you need ratchet wrenches and extension bars.
Click to expand...
I might have some of them,
They are nice sockets, but they rust for fun and the size stamping is so shallow it is bloody awkward to read,

IMG_4667.jpeg
 
miktdish said:
Of course what we all really want is a set of these ...

Pardon our interruption...

www.ebay.co.uk
These

Pardon our interruption...

www.ebay.co.uk

and these ...

Pardon our interruption...

www.ebay.co.uk

So when a mate says "have you got a 16mm socket" you can say (nonchalantly), "yeah, somewhere, i've got 3/8, 1/2 or 1/4", have a look in the third drawer on the tool chest".

Of course then you need ratchet wrenches and extension bars.
Click to expand...
You’ve took that too far
 
I use Halfords Advanced and Draper Expert (which I’m convinced come from the same source), Teng and US Pro. Haven’t had a failure yet in 4 years of work on rusty, old, neglected machines every day so I’d recommend all of them. The real secret is using ample amounts of Plus Gas as long as possible before you start to work!
 
lynall said:
Maybe, tbh this is about the poshest thing I own, and no one gets to see it!

Ps the scabby one on the left is nowt to do with me!
I spent years trying to find one of these boxes for sale KRL triple bank with two lids, quite rare.

View attachment 327884
Click to expand...
It looks like a well earned source of pride mate. Love it. My brother in law has a SnapOn tool box with the locker, desk/work station etc in the centre thing that cost him A LOT of dosh. I get it though, as they are a thing of beauty before you open a drawer.
 
miktdish said:
Of course what we all really want is a set of these ...

Pardon our interruption...

www.ebay.co.uk
These

Pardon our interruption...

www.ebay.co.uk

and these ...

Pardon our interruption...

www.ebay.co.uk

So when a mate says "have you got a 16mm socket" you can say (nonchalantly), "yeah, somewhere, i've got 3/8, 1/2 or 1/4", have a look in the third drawer on the tool chest".

Of course then you need ratchet wrenches and extension bars.
Click to expand...

Most of my tools are snap on & mac, snap on was in today he had a pink tool box on the van with carbon trim it must be for a freelander owner. 🤣 🤣
 
You must log in or register to reply here.

Similar threads

J
High Mileage Freelander 2 - am I crazy or could this be a good buy?
Replies
3
Views
719
Nodge68
Nodge68
seldom
L320 rear bushes
Replies
8
Views
582
Mark Piercy
Mark Piercy
O
Electrical - starting fault/issue (seeking help/advice) - 1996 Defender 110 300TDI
2
Replies
27
Views
1K
tottot
tottot
badlad
Are the hoses different
Replies
4
Views
452
badlad
badlad
chemmie
Rear wheel hub adventures
Replies
12
Views
1K
chemmie
chemmie
Back
Top