Immobiliser has Disappeared!!!

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

comfygeoff

New Member
Posts
7
Location
Edinburgh
P reg discovery 1 diesel. After going through all the forums trying to work out how to get my car started i found a thread showing how to pull of the dash to get to the spider unit. I ordered an immobiliser bypass and it arrived today. So i pulled out the dash to find that there is no immobiliser there where it's supposed to be. Does anybody have any ideas where i can find it on this model? It seems to be controling the stop solenoid and no fuel is getting to the engine. It turns ok but doesn't fire up.
 
P reg discovery 1 diesel. After going through all the forums trying to work out how to get my car started i found a thread showing how to pull of the dash to get to the spider unit. I ordered an immobiliser bypass and it arrived today. So i pulled out the dash to find that there is no immobiliser there where it's supposed to be. Does anybody have any ideas where i can find it on this model? It seems to be controling the stop solenoid and no fuel is getting to the engine. It turns ok but doesn't fire up.

Somebody may know if you tell them which model and year you are talking about.
 
whats on the rear of the injector pump a single wire ans solenoid or a black box with a loom

Sorry for the late reply, i went in to a massive huff with it and got my bicycle out of the shed.
IT has a black box. I had bought an immobiliser bypass and just in case i got a new stop solenoid too. I guess neither of these things are going to work.
Furthermore i've asked 7 mechanics to come and take a look at it and none are willing to touch a 4 x 4. So i guess i've no choice but to try hard to fix it and not cry.
 
Sorry for the late reply, i went in to a massive huff with it and got my bicycle out of the shed.
IT has a black box. I had bought an immobiliser bypass and just in case i got a new stop solenoid too. I guess neither of these things are going to work.
Furthermore i've asked 7 mechanics to come and take a look at it and none are willing to touch a 4 x 4. So i guess i've no choice but to try hard to fix it and not cry.
like this
upload_2015-12-11_9-4-12.jpeg

you can ,break off the cover and wire solenoid with a single wire ignition feed
 
12695400_10153190066706601_1063231229_o (1).jpg
[/GALLERY]
0
Just checking. I started to break this plastic cover but it doesn't look the same. It looks like there is some kind of electric circuit underneath. What do you reckon?
 
Last edited:
Back
Top