Landyfella
Active Member
- Posts
- 162
- Location
- Cambridge
identiy these seats please
- Thread starter Landyfella
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Wildefalcon
Well-Known Member
- Posts
- 1,669
No, they look like 90/110 or defender frames. Series seats are a lot more simple.
The base just drops between two rails, and the back is bolted to two uprights from the rails.
The base just drops between two rails, and the back is bolted to two uprights from the rails.
Wildefalcon
Well-Known Member
- Posts
- 1,669
Later ones (1980's) have adjustable bases on the drivers side.
Landyfella
Active Member
- Posts
- 162
- Location
- Cambridge
thx. I'll have to send the Exmoor ones back.
Colthebrummie
Well-Known Member
- Posts
- 9,870
- Location
- Thatcham
If you can get them to fit, they will be an improvement on the originals, unless, of course you are after originality.
Col
Col
Landyfella
Active Member
- Posts
- 162
- Location
- Cambridge
I quite like the the higher backed seats so would like to get new covers for those. who does the best covers and who does okay covers? Cheers
Deluxe seats are higher backed than standard, but the frame you have looks like early 90/110 or defender seat frames, but you are missing the head rest. You can either get the correct frames to fit the original deluxe seats, or you can get foams and covers to restore the frames you have, although you would still be missing the head rest. Exmoor trim also do retrim kits for the seats you have: LINK
rob1miles
Well-Known Member
- Posts
- 3,565
- Location
- Slough and Bath
I have a mix of de-lux (for me) and std seats in my series. Took the covers off to sort them out and none look like that. As above the Series seats are much simpler and the "de-lux" shape comes from the foam. I got some Rover head rests off e-bay and modified the std seats so they fitted, just used heavy duty "p" clips fixed to the seat back.
