For Sale Hydraulic pipe bender, trolley jack, space heater and tools

Clearing a relatives house so I have some useful bits and bobs.
Clarke Hydraulic pipe bender used for a couple of jobs no longer needed cost £130 new £70 collection only as its heavy, comes with all tooling from 1/2" to 2" pipe


Snap on / Blue point air drill £35
Un branded air saw works well uses standard hack saw blades £25
Trolley jack, proper garage one, goes very low so fits under modern cars, its dirty but works £40 collected
Assorted Snap on stuff
Heres a rough list
Snap on 8-19mm 6 sided 3/8 drive sockets on a rail £70
10-12mm Flare nut wrench £10
Snap on 7/16 combination spanner OEX14a £8
Snap on Crows feet 24mm (FCOM24) and 19mm (FCOM 19) 3/8 drive £10 each
Snap on Crows foot 1 5/8" 1/2" drive (SCO52) £15
Snap on 6 sided 14mm deep socket 3/8 drive as new £10
Snap on 6 sided 12mm deep socket 3/8 drive flaking chrome so dealer should swap £10
Snap on 6 sided 13mm semi deep socket 3/8 drive £10
Snap on 3/8 drive impact wobbly universal joint, £15 ( £40 new)
Snap on 3/8 Drive 12 point sockets 7/8", 13/16 and another 13/16" £6 each
Snap on 6 sided 3/8 drive sockets 18mm,14mm,13mm, 9mm £6 each
Snap on 3/8 impact sockets 21mm, 24mm £6 each
Snap on 1/2 impact socket 19mm £6
Snap on 1/2" 14mm six sided socket £6
Snap on screwdriver soft handle in black and green No1 Phillips £10
Snap on RBM1618A Ratchet spanner £10
I also have some assorted larger sized Blue point spanners all brand new
Space heater, tatty needs a new thermocouple but still works, complete with gas bottle, I can show it working £50

Still got the pipe bender? what postcode?

cowasaki said:

Still got the pipe bender? what postcode?

Click to expand...

Yes I still have the bender. Its WA9 just off junction 7 (Rainhill) of the M62

Air saw and space heater have now been sold

winchman said:

Yes I still have the bender. Its WA9 just off junction 7 (Rainhill) of the M62

Click to expand...

I'll have it if I can collect it next weekend.

You have first dibs
PM on its way with contact details

winchman said:

You have first dibs
PM on its way with contact details

Click to expand...

Thanks. I just can't get there until next week that's all. Shame the 24mm is 3/8" too

cowasaki said:

Thanks. I just can't get there until next week that's all. Shame the 24mm is 3/8" too

Click to expand...

No problem happy to keep it for you. The tools are just an assortment of odds and ends so its all the more unusual stuff, should go when I do an Auto jumble in the summer as I have a few collectables I need to shift.

winchman said:

No problem happy to keep it for you. The tools are just an assortment of odds and ends so its all the more unusual stuff, should go when I do an Auto jumble in the summer as I have a few collectables I need to shift.

Click to expand...

Broke my 24mm doing the rear tie bars on the Defender, both normal and long ones split (I'll get new Clarke ones they are ok)...... My own fault as I couldn't be arsed going through the house to the garage to get the impact ones then used my 450Nm impact gun I even had a 3/4" socket in the garage! Just bought a behemoth 3/4" 90cm breaker bar so jumping on that should give about 1500-2000Nm of pressure with my spangley new 3/4" impact sockets

Bender now sold to cowasaki, nice to meet you.