L322 How to completely flush transmission

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

paulpdh

Active Member
Posts
227
Location
Norfolk
Hi

Do any guides exist on here on completely dumping atf ? Obviously changing the fluid only changes half. Checked my level today and my lovely pink atf is as bad as before. I could only change 6 ltrs. Meaning 6 ltrs of crap stuff remained.

I assume I need to pull cooler lines etc to empty torque converter etc.
 
Container of fresh fluid on cooler return pipe, and empty bucket on cooler flow pipe. Let the transmission replace the old with new ?
 
Container of fresh fluid on cooler return pipe, and empty bucket on cooler flow pipe. Let the transmission replace the old with new ?

Yes thats what I'm thinking. If you change from box it's only 5 or 6 litres. The remaining 6 is in the pipework and torque converter
 
My oil sample today after changing fluid 3 weeks ago.

Clearly mixing with old crap
 

Attachments

  • 20210406_192742.jpg
    20210406_192742.jpg
    192.4 KB · Views: 106
I changed the oil in mine x3 or 4 times to clear it out tbh you could go the flush route via the gearbox oil cooler but that's another world of pain when the push fit connectors, yes I did say push fit fall apart as you try to remove the lines from the cooler.
 
I changed the oil in mine x3 or 4 times to clear it out tbh you could go the flush route via the gearbox oil cooler but that's another world of pain when the push fit connectors, yes I did say push fit fall apart as you try to remove the lines from the cooler.

Yes agreed. I think I'll change it again and another further change in a month. I really don't need extra hassle from it. So best no go looking for it. Cheers for your reply. Did you do filter everytime?? Drop the pan
 
Back
Top