- Posts
- 83,300
- Location
- Embasinga stocæ
What is the correct tool and rebuild kit for the high pressure fuel pump. Old threads have links but no longer exist. Seems to be variations when I search web.
Freelander 1 High pressure fuel pump
- Thread starter The Mad Hat Man
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Hi mhm
From memory you will need the m47 m57 bmw hydraulic valve lifter puller from the bay (set of 2) can't remember which one I used but was cheaper to buy set than by one ..Bosch service kit ordered on line The little label on the hp pump will give you the code to order the correct kit. Think I payed about £20 for service kit and £25 for pullers. Also a 17 MM. Allen key to get the plug out of the timing cover to get the puller in and new gasket for between pump and timing cover..
From memory you will need the m47 m57 bmw hydraulic valve lifter puller from the bay (set of 2) can't remember which one I used but was cheaper to buy set than by one ..Bosch service kit ordered on line The little label on the hp pump will give you the code to order the correct kit. Think I payed about £20 for service kit and £25 for pullers. Also a 17 MM. Allen key to get the plug out of the timing cover to get the puller in and new gasket for between pump and timing cover..
- Posts
- 83,300
- Location
- Embasinga stocæ
Ta
I will pass that info on.
I will pass that info on.
- Posts
- 83,300
- Location
- Embasinga stocæ
guineafowl21
Well-Known Member
- Posts
- 3,352
- Location
- Inverness
http://www.darwendiesels.com/
Write down the numbers on your pump and then give these ^ people a ring. Seals are £12, tool is £40 or so. They are very helpful and know exactly what to send you.
I've just done this job so let me know if you need any pointers.
Write down the numbers on your pump and then give these ^ people a ring. Seals are £12, tool is £40 or so. They are very helpful and know exactly what to send you.
I've just done this job so let me know if you need any pointers.
guineafowl21
Well-Known Member
- Posts
- 3,352
- Location
- Inverness
Looks similar - tool number is LRT 12 - 178 and LRT 12 - 178(1).
Darwen diesels supply tool and seals as a kit.
Darwen diesels supply tool and seals as a kit.
