Hi lift jacking sizes

V8_Disco · Mar 24, 2010

Ive nearly finished making a custom rear bumper for my disco, before i paint it i want to weld on a pair of high lift jacking tubes to it, although i dont have a jack yet! What i need to know it what diameter tube is needed and how long should the tube be for the pin adaptor on a hi lift

wiltshire landyman · Mar 24, 2010

i was lucky....my swingaway carrier came with a hilift jacking plate and bracket,maybe you could do summit similar

V8_Disco · Mar 24, 2010

dont think i explained that very well, i dont mean i want to mount the jack on the vehicle, i want to know the dimensions of the holes in the bumper the jack fits into when you want to jack it up

where this goes - http://www.expeditionexchange.com/hilift/DSC03691.jpg

wiltshire landyman · Mar 24, 2010

V8_Disco said:
dont think i explained that very well, i dont mean i want to mount the jack on the vehicle, i want to know the dimensions of the holes in the bumper the jack fits into when you want to jack it up

where this goes - http://www.expeditionexchange.com/hilift/DSC03691.jpg

dunno then mine has flat nose

Pikey · Mar 24, 2010

wiltshire landyman said:
dunno then mine has flat nose

They all had a flat nose. That's an extra what ya get for em so it'll fit in the jacking holes in chassis & Rear crossmember :doh:

Paul D · Mar 24, 2010

I'll measure it tomorrow when it's light enough ..

kingsonlim · Mar 24, 2010

The jack adapter's rod is 1 1/8" or 30mm.

baggyjim · Mar 24, 2010

kingsonlim said:
The jack adapter's rod is 1 1/8" or 30mm.

just making some sliders for side of mine and added some tubes to my winch bumper used 42mm od tube with 5mm wall fits nicely

wiltshire landyman · Mar 24, 2010

redhand said:
They all had a flat nose. That's an extra what ya get for em so it'll fit in the jacking holes in chassis & Rear crossmember :doh:

so how come ya can buy them wiv a flat nose or wiv a jacking pole:doh:

V8_Disco · Mar 24, 2010

kingsonlim said:
The jack adapter's rod is 1 1/8" or 30mm.

cheers guys

[JP] · Mar 25, 2010

can you? i thought all hi-lifts were flat, and the jaking pole was an add on

ratty · Mar 25, 2010

[JP];1040112 said:
can you? i thought all hi-lifts were flat, and the jaking pole was an add on

You are correct.

Griffdowg · Mar 25, 2010

jesus

ratty · Mar 25, 2010

Griffdowg said:
jesus

Yes?

Griffdowg · Mar 25, 2010

ratty · Mar 25, 2010

Griffdowg said:

snigger

Hi lift jacking sizes

V8_Disco

New Member

wiltshire landyman

I’m back

V8_Disco

New Member

wiltshire landyman

I’m back

Pikey

Dummy Ejection Facilitator..

Paul D

Old, nackered 'n broke, but the Landy is fine . :)

kingsonlim

New Member

baggyjim

New Member

wiltshire landyman

I’m back

V8_Disco

New Member

[JP]

New Member

ratty

I'm not special I'm limited edition

Griffdowg

New Member

ratty

I'm not special I'm limited edition

Griffdowg

New Member

ratty

I'm not special I'm limited edition

Similar threads