Help removing broken front Indicator holder.

hello people, problem beyond my ken, freelander mk1 td4 2006 facelift.

problem, Trying to remove under front wing the indicator bulb holder, the turn button/ holder promptly broke off - SO how to remove said indicator holder, As i see it cannot remove front light unit without first pulling this indicator bulb holder ???? Any advice welcome, The wheel arch frame hole does not readily offer space for tools etc.. many thanks Prof.Ken in Romania. or [email protected].

Pliers or drill 2 small holes and put screwdrivers in to turn ??

andyfreelandy said:

Pliers or drill 2 small holes and put screwdrivers in to turn ??

Click to expand...

many thanks sir, be difficult within the area of cut out, but will give it a try,,

There may be a plug for the wires. If that unplug then remove the light unit. Can't remember if has or not. Can check later on a spare unit if you need it.

No plug on indicator. All wiring on multi-plug in engine bay. See photos. The whole lamp unit will come out with the indicator lamp holder still fitted.

If you can't reach then pop the wheel arch liner out. If you want to take the whole lamp unit out then bumper has to come off too!

Hope these help you see what you are dealing with.