Help please from newbee

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
G

gaz8885

New Member
Posts
31
hi all

I have a 300tdi on a p plate '97 auto I have cleened intercooler and used a can of 10k boost through the air inlet before turbo, and taken off the viscous fan.

I now have a loud whistle/air breathing type of noise only when driving above 2500 revs, dont know why please help???? its a bit like the sound you hear when a boy racer in a soouped up suburu passes you, fairly loud air type whistle, does not happen in neutral and rev to 2500??

Also can you tell me when taking off the fan do you split the blades from the centre alloy looking carrier and then put this back on the pully or just leave the complete fan off??


Many thanks for any help

Gaz
 
Sorry , whats 10k boost ?? I do have a nasty idea that if this 10k stuff is a liquid and you poured it down the inlet and then its gone though the turbo , then , I think we have the answer .!!!
 
gaz8885 said:
hi all

I have a 300tdi on a p plate '97 auto I have cleened intercooler and used a can of 10k boost through the air inlet before turbo, and taken off the viscous fan.

I now have a loud whistle/air breathing type of noise only when driving above 2500 revs, dont know why please help???? its a bit like the sound you hear when a boy racer in a soouped up suburu passes you, fairly loud air type whistle, does not happen in neutral and rev to 2500??

Also can you tell me when taking off the fan do you split the blades from the centre alloy looking carrier and then put this back on the pully or just leave the complete fan off??


Many thanks for any help

Gaz
Click to expand...
great intro ..one post wonder:scratching_chin:
 
Hi
Many thanks for all replies, I will check the pipes again tomorrow and will let you know the outcome,

Thanks again
Gaz
 
Hi Everyone,
Many thanks for all your help, I found the problem, it was a jubilee clip at the bottom of the intercooler that i had not done tight enough,doh!
Anyway all sorted thanks again.

Gaz
 
You must log in or register to reply here.

Similar threads

C
Can anyone help?L322 td6 noise when releasing accelerator.
Replies
2
Views
566
cpdriley
C
R
SLS Warning lights after sensor change
Replies
2
Views
664
sierrafery
sierrafery
Skyisthelimit
Disco 1 1991 v8 fuel pump electrical wiring
2
Replies
31
Views
2K
Skyisthelimit
Skyisthelimit
B
Blower / Heater Motor squeak-Hum at slow speeds.
Replies
7
Views
1K
JohnKeane
J
P
Help needed please
Replies
8
Views
937
Firebobby1
Firebobby1
Back
Top